MOIST HEAT OPTION
The BIOS Living heating pad includes a separate sponge for moist heat.
To reduce the risk of personal injury, do not immerse the heating pad into
water to wet the surface. Personal injury may result.
To reduce the risk of product and/or property damage, do not use gels,
solvents, or any other liquid to saturate or in conjunction with the sponge.
To reduce the risk of fire, electric shock, or serious personal injury, never plug
the product into an electrical outlet with a wet hand.
1. Thoroughly saturate the sponge only, with warm water.
2. Lightly wring excess water out of the sponge.
3. Place the sponge on top of the heating pad and insert the sponge and heating
pad into the cover. Close the snap.
4. Dry hands thoroughly before plugging the power cord into any electrical outlet.
5. Plug the Power Cord into a 120-volt AC electrical outlet.
6. Use the control to set the heat at the desired level (See: How to use your BIOS
Living Heating Pad).
CARE AND MAINTENANCE
Before each use, always carefully inspect the heating pad (including the inner
vinyl heating pad) to assure it is in proper working order; discard if there are
signs of wear and tear, frayed wires, cracks or tears in the covering, if it looks
worn or if the electrical cord is frayed. The existence of these conditions can
cause the heating pad to catch fire.
OUTER COVER
1. Disconnect the heating pad from the electrical outlet.
2. Remove the inner vinyl heating pad from the cloth outer cover.
3. Cold water machine (gentle/delicate cycle) or hand wash the cloth outer cover
using a mild detergent. Hang or lay flat to dry. Tumble dry on low heat.
VINYL HEATING PAD
1. Wipe the inner vinyl heating pad with a soft, damp cloth, only use water to
clean the surface (do not use gels, solvents, or any other cleaning liquid to clean
surface). Lay flat to dry. Do not tumble dry.
2. Make sure the product is completely dry before the next use.
3. Store the product in a cool, dry, dark location after each use. Do not fold or crush
the product.
ELECTRICAL SPECIFICATIONS
Voltage
Frequency
Wattage
Amperage
120 VAC
60 Hz
50 W
0.42 A
FREQUENTLY ASKED QUESTIONS
Q.
What temperature does this product reach?
A.
Maximum temperature does not exceed the 176°F (80°C) when set to “Hi”.
Temperature varies by heat setting; you may need to use a lower heat setting
depending on the specific application and your personal preference.
Q.
How much time does it take to warm up to each temperature selection?
A.
Temperature Selection
Heat Up Elapsed Time
Low
10 Min.
Med
12 Min.
Hi
15 Min.
FIVE YEAR WARRANTY
The BIOS Living Heating Pad has a 5 year warranty to be free of manufacturing
defects in materials and workmanship under normal applications for 5 year of
the original owner. If this product becomes inoperable due to defect and requires
repair, return the product with all component pieces and proof of purchase to the
address listed below. This warranty does not cover any shipping/transport costs.
This warranty does not apply if the product is subject to misuse, neglect, rough
handling or damage.
Ship the unit prepaid and insured (at owners option) to:
Thermor Ltd.
Attn: Repair Department
16975 Leslie Street
Newmarket, ON L3Y 9A1
www.biosmedical.com
Email: [email protected]
