Page 16 of 21
6.4
Main Menu
Once logged in, you will arrive at the Main Menu
page. On this page you can select the operation
mode of the machine.
“Manual Mode”
will take you to a control panel
interface where you can manually manipulate
the machine parameters during an experiment
session. These sessions can be recorded for
later analysis, reporting or playback in the “
Data
Viewer”
mode. You can think of Manual Mode
as the experiment “composer”, and the data
viewer as the experiment “player/editor”.
On the Data Viewer mode, you can monitor the
various parameters of a perfusion session, and
re-create or edit previous sessions step-by-step.
In this page you will also see the User account, the Software Version installed in your perfusion
machine, and the machine
Status Bar
at the bottom. The Status Bar will display any alarms or
important messages related to the function of the machine.
You can also end the session from this page either by logging out of your user account or by
turning the system off. PLEASE DO NOT TURN THE MACHINE OFF FROM THE POWER
ENTRY MODULE BEFORE BEING PROMPTED TO DO SO.
6.5
Manual Mode
6.5.1
Experiment Data
Selecting manual mode will take you
to the screen below, where you will be
required to fill out a form type page
with all the relevant data of the donor,
the organ and the Operator. Most of
the fields include drop-down menus for
quick selection. The drop down list can
be edited to include any other options
not in the default list.
Once the data is filled, you can
continue to the Control Panel by
clicking the NEXT arrow on the bottom
right.
