10
The technical documentation of the burner is always inside the box, and a bill of
lading is on the
outer side.
Products should be transported only in the original packaging,
thus eliminating the possibility to damage
the units.
2. INSTALLATION
The burner is mounted in such a way to have the furnace in the combustion chamber
and the burner is fastened with bolts using mounting holes located on the burner (Picture
6).
If required, installation can be carried out using adapter flange as well as with use of
noncombustible, sealant material
.
Picture 6 – Burner Installation
CAUTION!
If there is a mounting seat stipulated by the manufacturing plant,
then the burner is installed on it in accordance with the documents delivered along
with equipment.
3. BURNER OPERATION
3.1. Operating Restrictions
The boiler room in which the burner is installed shall be equipped with exhaust
ventilation ensuring air flow at least 5 volumes of air in the boiler room for one hour
.
