BioNote Vcheck V200, User Manual, Page: 38 / 60

38
Read Only mode
1. First, select Read Only’ mode. Refer to the assay specific package insert when collecting the specimen for the test
and preparing the test procedure.
2016. 11. 25 l 17:31:12
2. Input operator's ID, patient ID, and order #. The operator's ID can also be input with the barcode scanner. If the ID
is not input into the analyzer, the analyzer will regard the operator as a guest user.
3. Prepare test device and label the test device accordingly.
· Add prepared specimen #1 to test device #1, then immediately set your timer to the designated processing
time as indicated in the assay-specific package insert.
· One minute later, add specimen #2 to test device #2.
· Continue adding the appropriate prepared specimen to the appropriate test device at an interval of one
minute.
· When the timer goes off for test device #1, insert test device #1 into the analyzer, the analyzer will display
the result in approximately ten seconds.