Performing a Test in Order
33
32
PRECAUTION
-
Load the lancing device ( Refer to Instruction manual of the lancing device )
- Be careful to load the lancing device to avoid being pierced by the needle.
Preparing your meter and strip
4. Check that the code number blinking on your meter matches the
code highlighted on the vial of test strips currently in use.
1. Remove new test strip from
vial and
re-cap the vial cap
immediately.
2. Insert the test strip with
indication symbol, facing up,
into test strip port.
3. Push the test strip in until it
snaps and stops. The meter
turns on automatically.
When you put the strip into
the strip port, you will hear a
sound of " beep ".
Performing a Test in Order
4
5
6
7
4) Twist off and set aside the protective cover of the disposable lancet.
5) Replace the depth adjustable cap.
6) Choose a depth of penetration by rotating the top portion of the depth adjustable
cap until the setting depth matches the window. Settings are based on skin type
” “ for soft or thin skin;
” “ for average skin;
” “ for thick or calloused skin.
7) Hold the hub in one hand and pull on the plunger in the other hand. The device will
be cocked. Release the plunger, it will automatically move back to its original
position near the hub.
