TROUBLESHOOTING
Problems
Solutions
The device does not work.
The device stopped working during usage.
The device is not hot enough.
“F” flashes on the digital display.
- After 90 minutes, the device switches off
automatically. Allow the device to cool down
for 10 minutes and switch it on again.
- The device may have overheated. Let the
device cool down for 10 minutes and switch
it on again.
- Make sure the power cord has been
connected firmly and correctly to the heating
pad first, before inserting the power plug into
the electrical mains.
- After about 15minutes, the device should
have heated up to the corresponding
temperature setting. Increase the tempera-
ture setting if necessary. Temperature
setting of “6” is the hottest at up to 70
o
C*.
Actual temperature may be lower depending
on ambient conditions.
- Make sure the power cord has been
connected firmly and correctly to the heating
pad. Then insert the power plug into the
electrical mains again and switch it on.
- Try using another power socket.
·
·
·
·
CLEANING AND MAINTENANCE
Before cleaning the device, unplug the power plug from the electrical mains and allow the
device to cool down completely.
Unzip the fabric cover and remove it from the heating wrap. The fabric cover can then be
washed by hand (or in a washing machine) at maximum 30°C. Washing too frequently
can lead to colour changes or abrasion. Thus only wash the fabric cover when neces-
sary. Lay the fabric cover flat and air dry.
Clean the heating wrap with soft damp cloth, lay it flat and air dry.
For storage, keep the device in a dry place. Make sure it is folded properly. Do not place
heavy objects on it to prevent buckling of the heating elements.
