CY-E500 Series computer
Unscrew the back cover. The (+) side should be facing up.
Gently remove the battery and replace it with a new battery model CR2032.
Sensor
Unscrew the back cover. The (+) side should be facing up.
Gently remove the battery and replace it with a new battery model CR2032.
R
When E500 faces interferences by other device. It shows Err in
the middle column.
CY-E500 Series cycle computer
CY-E500
Due to it’s Touch feature, there is a reminder for cycling with gloves. Please use the
flimsy gloves to avoid irresponsive.
There will have a rattle sound when vibrating. It is a part for Auto Start function.
It is a normal reaction.
in raining day.
Warranty does not cover the batteries, damages due to misuse, abuse or accidents,
cracked or broken cases, negligence of precautions, improper maintenance or
commercial use.
Warranty is void if the repairs are done by non authorized service technician.
During this warranty period(one year)the product will either be repaired or
replaced without charge.
LIMITED WARRANTY
This product is for one year limited warranty commencing on the date of purchase.
The product will be free from defects in material and workmanship for one year
from the date of purchase.
The warranties contained herein are expressly in lieu of any other
warrantiesincludingimplied warranty of merchantability and/ or fitness
for purpose. In no event shallmanufacturer be liable for any damages,
direct or incidental, consequential or special,arising out of or related to the
use of this manual or the products described herein.
Receiver
Speed Sensor
Operating Temperature
Storage Temperature
Emitted Frequency
Battery
Weight
N/A
30.6 grams
20 grams
433M + 40KHz
0
℃
~ 40
℃
-10
℃
~ 50
℃
3 volt lithium 2032 cell
CAD Range : 0~255
It features avoidance of accidental activation of other functions.The cycle computer will
automatically enter into Sleep and Key Lock Mode after 6 minutes if no signals received.
Shortly press “SET” key to unlock Key Mode.
Key Lock Operation
The code of ID will be automatically stored without scanning after batteries changed.
ID scan takes place when sensors are changed or signals from sensors are not received.
In any mode, press and hold both “SET” key and “MODE” key for 3 seconds to go to ID scan mode.
Under ID scan mode, press “SET” key to automatically pair the sensor.
If the scan was unsuccessful, the display will show Err, Please press “SET” key to pair again.
Note: If cycle computers equipped with altimeter functions, please keep pressing for another 3
seconds for ID scan after home setting.
How to ID scan?
keep holding
M&S
>3SEC
S
or
M>3SEC
(Option in Digital Coded Cycle Computers)
If the display appears Err01, means the cycle computer is running out of electricity
.
Please replace it with a new battery (CR2032)
Option in Digital Coded Cycle Computers
The user can press “SET” key at any time to activate the BACKLIGHT,
the BACKLIGHT will de-activate itself automatically after 4 seconds.
BACKLIGHT
If the display appears Err01, means the cycle computer is running out of
electricity. Please replace it with a new battery (CR2032)
It shows 2 seconds every minute.
If the display appears Err02, means the speed sensor is running out of
electricity. Please replace it with a new battery (CR2032)
It shows 2 seconds every minute.
If the display appears Err03, means the cycle computer and speed sensor
are running out of electricity at the same time. Please replace both with
a new battery (CR2032)
It shows 2 seconds every minute.
NO signal in 6 minutes the computer will go into rest mode. After 5
times of rest mode the 6th time the computer will go to SLEEP mode.
(Option in Digital Coded Cycle Computers)
(Option in Digital Coded Cycle Computers)
27.5 x 2.10
2170
2202
27.5 x 2.30
