Inserting or Removing the Battery
The battery key is attached the 15mm wrench located in the side pocket of the eBike trunk bag as well as in the van tool kits
Removing the battery
1.
Turn off the BionX propulsion system via the console
2.
Lightly press on the battery release arm, insert the key and turn clockwise
3.
The lock cylinder will pop out, freeing the battery release arm
4.
Remove the battery by opening the release arm
5.
Slide the battery upwards on the rail
6.
Lift the battery to remove
Inserting the battery
1.
Place the battery onto the docking station
2.
Slide the battery down the rail gently towards the connector
3.
The release arm will begin to move to the closed position as the battery slides towards the connector
4.
When the release arm is almost closed, hold it in place and simultaneously push in the lock cylinder – you will hear a “click” when the lock cylinder
is properly closed
