Chapter 2: System Overview
2-2 VITEK
2
Smart Carrier Station Service Manual
Unpacking Procedure
To remove the SCS from its shipping container:
1. Open the shipping carton and remove the unit from the carton.
2. Carefully remove the unit from the packing material. Be sure to remove all parts
and literature from the carton.
3. Remove the remaining packing materials from the SCS and store with the
shipping container.
Installation Procedure
After completing the unpacking procedure, the SCS is ready to be placed in its permanent
location. The SCS is intended for use on any normal, flat bench top commonly found in a
microbiology lab. Some cables must be connected to the unit. Figure 2-2 shows the cable
connections on the back of the unit.
G
D
F
C
E
B
A
G
D
F
C
E
B
A
SCREEN CONTRAST
S
BAR CODE SCANNER CONNECTION PORT
(
)
9-PIN SERVICE / UPDATE PORT
110/220V SUPPLY RECEPTACLE
FUSE HOLDER
ON/OFF SWITCH FOR SMART CARRIER
KEYBOARD CONNECTION
O
*
*
Unit accepts either 110VAC or 220VAC supply
Smart Carrier will sense and determine value
supplied voltage and automatically adjust
value internally within the power supply.
Figure 2-2
SCS – Cable Connections
510747-1 REV. 01/02