26
8. CLEANING AND MAINTENANCE
Fully comply with the following necessary daily maintenance
requirements to make sure the device is intact and to
guarantee its long-term performance and safety.
BioMed® Revived II
•
This device may be wiped clean with a damp clean cloth.
•
Do not submerge this device in liquids or expose it to large
amounts of water.
•
Never use aggressive cleaning products or stiff brushes to
clean the device.
•
Remove the batteries before cleaning the device.
•
Do not use the device unless completely dry and protect it
from dirt and moisture.
Electrodes
•
Electrodes can become worn or damaged over time or
with regular use. To get the maximum benefit from the
BioMed® Revived II, it is important that you replace the
electrodes at the first sign of wear.
•
When the electrodes are not connected to the unit, the
electrodes adhesive gel may be cleaned by rubbing with
tap water on a finger to remove contaminants and restore
adhesion.
•
When the electrodes are not in use, always store the
electrodes on the plastic sheet they came on and in the
plastic bag they came in.
Lead Wires
When disconnected from the unit, the lead wires may be
wiped with a damp cloth. If the wires appear brittle, broken
or the tingling sensation is turning on and off randomly,
(intermittently) or you have been using them for more than six
months, it is time to replace the lead wires.