HPR LITE READER
QUICK START GUIDE
2
Reading PIT Tags
•
To scan for PIT tags press and hold the READ button down. The reader will display
‘Reading...’ while it searches for a tag. Once the button is released the reader will stop
scanning.
•
When a tag is detected the reader will stop scanning automatically and will display the
tag information on the screen.
•
If no tag is detected, the reader will display the message ‘No tag detected’, and return to
the main screen.
Communications
The HPR Lite Reader is compatible with Biomark Device Manager Windows based software.
The software offers easy to use GUI for configuring the reader’s settings, updating its firmware
and downloading tag data from the reader. For more information about this product, please visit
The HPR Lite reader is a USB device and does not require a specific baud rate to be selected
when setting up communications. If a baud rate is required by a program, any selection up to
115,200 will work.
Drivers for the reader should be installed automatically when it is connected to a PC via USB,
however if the drivers are not successfully installed automatically, they can be found by visiting
the HPR Lite page, in the Downloads & Help section at:
https://www.biomark.com/hpr-lite-reader
By default, the Bluetooth module is
discoverable and connectable
(Slave mode or device)
.
Note:
When Bluetooth authentication is disabled, default PIN code is 1234. This may be required
with old Bluetooth devices.
Reader Internal Clock
The reader’s internal clock is set at the factory to match the local time. This can be easily changed
using the reader’s LCD user interface or Device Manager software.
For detailed information on how to adjust the date and time settings to your time zone please refer
to the HPR Lite User Manual available for download on the Biomark website:
https://www.biomark.com/hpr-lite-reader
in the Downloads & Help section
Warranty
•
The HPR Lite reader is warranted against defects in materials and workmanship, under
normal use and service for one (1) year from the day of shipment.
•
This warranty will not apply if adjustment, repair or parts replacement is required because
of accident, neglect, damage during transportation or causes other than ordinary use.
•
Manufacturer’s sole responsibility under this warranty shall be at its option, to either repair
or replace any product which fails during the warranty period. In no event shall
Manufacturer be liable for any indirect or consequential damages or loss of profit.
