Biohit eLINE Lite, Instruction Manual, Page: 15 / 22

14
8. Select the speed in with (1=Min and 5=Max)
9. Press or to con fi rm selection and to display the speed out
10. Select the speed out with (1=Min and 5=Max)
11. Press to con fi rm selection
12. Now the text “TIP” is blinking on the display. Attach the tip
13. Con fi rm the programming by double clicking the START-button
Note:
Dispenser is now fi xed to the selected tip volume range
14. Place tip into the liquid and press
START-button to aspirate
15. Discard the prime excess by
pressing the START-button
16. To dispense, position the tip above the
receiving vessel and press START-button
and repeat until the cycle is completed
17. Finally position the tip to discard
excess volume and click twice
the START-button
18. Now the Dispenser is ready for next
pipetting cycle
Note:
It is also possible to continue to aspirate and dispense the same
volume without the empty function. To continue, keep the START-button
pressed during the last dispensing and within one second the direction of
the arrow will change. Keeping the START button depressed, place the tip
into the liquid again and then release the START button to aspirate the next
sample.
OUT
E
SPEED
IN TIP SIZE
4.00
ml
3
10
ml
2 x
SPEED
OUT TIP SIZE
4.00
ml
3
10
ml
2 x
SPEED
IN TIP SIZE
4.00
ml
3
10
ml
2 x