Biohit eLINE 73002X, Manual

Page: 10 / 36

10
4.3. Electrical specifications
Battery - Rechargeable NiMH battery pack with protection circuit
- 4.8 V, 500 mAH
- Charging time max 4 hours for empty batteries
AC-adaptor for Charging Stand or direct charging
- Input voltages and main plug according to local requirements
- Output voltage 7.5 VDC, 300 mA
AC-adaptor for Charging Carousel
- Input voltages and main plug according to local requirements
- Output voltage 9 VDC, 1200 mA
5. Programming principle
The Biohit
e
LINE pipettors features 10-11 different operating modes and six
different storage locations for frequently used modes with user-selected
settings. The operating modes are divided in to three Mode Ranges (PIPET,
MULTI, PROG) and each Mode Range includes the following operating modes:
Mode Range: Operating Modes:
PIPET P, rP, P+
MIXING
, P
COUNT
, P
MANUAL*
MULTI d, dd, dd+
MIXING
, Sd, SA, Ad
PROG 1, 2, 3, 4, 5, 6 (=storage locations)
Programming is performed by using the Select, Enter and arrow keys. The
mode range is selected with the Select key, the desired operating mode is then
selected with the arrow key and selection confirmed with Enter key.
The setting changes (volumes, aliquots, etc.) are made with arrow keys and
confirmed with either Select or Enter key. In the shortcut programming the
changes are confirmed with the Enter key. In the shortcut programming the
speed adjustment is not possible. The use of the Select key in confirming the
setting changes enables also the speed adjustment.
Note: When the programming or pipetting cycle is completed it is possible to
make the setting changes inside the operating mode simply by pressing the
arrow key and confirming with Enter or Select.
The Biohit
e
LINE pipettor includes also six storage locations (Prog 1–6). The
operating mode with user-selected settings can be stored in to the storage
location under PROG mode for future recalls. After completing the setting
changes of the selected operating mode simply press Enter and Select keys
simultaneously, choose the storage location (PROG 1-6) with arrow key and
press Enter. The stored operation mode can now be recalled from the PROG
mode.