GeneExplorer Thermal Cycler Instruction for Use
Chapter One Introduction
―
4
－
⚫
Adopting advanced American ITI thermoelectric refrigeration technology and
thermoelectric refrigeration element manufactured under Japanese quality management
mode which presents stable and reliable performance;
⚫
Maximum ramp rate up to 4
C/s and can be adjusted based on experiment requirements.
⚫
Multiple temperature control modes and higher reagent compatibility.
⚫
Host machine of GeneExplorer Thermal Cycler can automatically recognize module and
run corresponding program.
⚫
Colorful large-screen display, humanized operation interface, simple and clear operation.
⚫
Power-off protection function, and after power supply recovery, it can continue to complete
the program unfinished.
⚫
Hot lid can adjust height and pressure based on actual using condition to adapt to different
reaction tubes and effectively prevent reagent evaporation and pollution.
⚫
USB standard port can be connected to general computers, convenient for software upgrade.
5
Use of GeneExplorer Thermal Cycler
GeneExplorer Thermal Cycler, taking a leading position among similar products, has combined
various advanced technologies and can meet requirements of various PCR experiments.
Different modules have the suitable consumables, there are as follows.
Standard 0.2ml centrifuge tu
be
PCR Microplate
Glass slide
GE-96G / GE-96S:
(1) 1×96×0.2ml
0.2ml standard centrifuge tube
(2) 12×8×0.02ml
PCR 8-Strip Tube
(3) 96×1×0.2ml (96 wells PCR Microplate)
GE-48D
：
GE-48DG: GE-48DS:
(1)
48×0.2ml+48×0.2ml (48 wells PCR Microplate)
GE-384G
：
384×0.02ml
（
384 wells PCR Microplate
）
GE-4I
：
4 pcs.of glass slide
