Biodom 27 A | instructions for use, maintenance and installation |
March 2019
16
Electrical connection
The pellet boiler must be connected to electrical network. Power supply cable is 3 m long, white and
designated with "220 V". Other connectors are for connecting the pump and room thermostat.
Figure 8
White cable – Boiler supply (220 V)
White connector – Pump
Black connector- Room termostat
If the power supply cable is damaged, it must be replaced. It can only be replaced by an authorized
person.
Electrical connection must be easily accessible even after the pellet boiler is installed.
ATTENTION
When the boiler installation is finished, it is mandatory to perform measurements of smoke
gases discharge.