VaDia Startup Guide v1.1
19/25
www.biocontrol.no/vadia
8.2. Set VaDia ID (if more than one VaDia is used)
This is handy for both USB and Bluetooth Streaming mode.
Connect VaDia to the USB port and start VaDia Manager.
After changing the ID, the VaDia USB cable has to be disconnected and then
reconnected to activate the new ID. The Found New Hardware message will
appear. Since the driver already exists on the PC, the drivers will install
automatically.
If the connection is ok, the system
parameters are displayed.
In the upper right corner the ID of
this VaDia is shown. This ID can be
changed to any text of max. 15
characters. This will then be used as
the program ID, the USB ID and the
Bluetooth ID.
Go to Setup>VaDia Setup
