July 2010
Expert Plus Quick Start Guide
Version 1.0
Elimination
If individual controls must meet set criteria
Transformation
If a calculation is to be applied to the entire plate
Thresholds
If samples are assigned to groups based on minimal
measurements or transformation value
Validation
If controls must meet set criteria for a test is to be
considered to be valid.
13.
The next page will prompt the user to configure the printout. Press enter to confirm choices.
14.
Name and save the new method using
Replace
(to replace existing method) or
Insert
(to add
to method menu). Enter a name for the method using the alphanumeric function. Press
enter to save method.
15.
To run the method, position cursor to the first position in the main menu. The plate carrier
will move out, allowing you to load the microplate. Enter a plate ID. Press the F3 key to select
the post run option, printer serial or none (if neither printer nor PC is connected). Results are
stored in the memory and can be recalled later, using the recall plate data option.