Biocare iE 101, User Manual

Page: 75 / 82

Appendix C EMC-Guidance and manufacture’s declaration
User Manual for Electrocardiograph -- 65 --
Appendix C EMC-Guidance and manufacture’s declaration
CAUTION

The use of accessories, sensor and cable which exceed regulations can increase the electromagnetic
emissions or decrease the electromagnetic immunity.
 Please don’t use the equipment with tightness and pile. The equipment should be detected according to the
requirements to make sure it working normally.

Please make the equipment safety according to the EMC, and install, fix it under the situation required by
EMC.

Even though the other equipments which measure up the CISPR also may cause disturbance.

When the amplitude of import signal narrow than regulated minimum amplitude may lead to inaccurate
measure.

Portable and mobile communications equipment will affect the performance of the equipment.
C.1 Guidance and manufacturer’s declaration – electromagnetic emission
Guidance and manufacturer’s declaration – electromagnetic emission
The Digital Electrocardiograph is intended for use in the electromagnetic environment specified below. The customer or the user of
the ECG machine should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions CISPR11 Group 1
The ECG machine uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions CISPR11 Class A
The ECG machine is suitable for use in all establishments, including
domestic establishments and those directly connected to the public
low-voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
EN 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
EN 61000-3-3
Complies