Setting the Wake-Up Alarm Time
Press the PROGRAM button once, so the display reads
“ALARM SET.”
Then adjust the alarm time
with (+) and (-) buttons until desired time is set. Holding in the (+) or (-) button will cause the alarm
time to change rapidly.
Setting the Time
Press the PROGRAM button twice
.
The Display should read
“CLOCK SET.”
Use (+) and (-) buttons
to adjust the time. The time moves rapidly if (+) or (-) button is held down.
Waking to the SunRise
The light will begin to gradually illuminate before your set wake-up time. The Sunrise Controller is
preset for a 30 minute wake-up sequence, i.e. the light will reach full brightness gradually over 30
minutes. For example, if you set the alarm for 7:00 AM, the light will begin getting brighter at 6:30
AM and reach full brightness at 7:00 AM.
To alter the wake-up sequence length, press the PROGRAM button 4 times until the Display reads
“SUNRISE 30.”
Press the (+) or (-) button, and the display will alternate between
“NO FADE UP”
(light goes from off to full-on at wake-up time),
“SUNRISE 15"
(15 minutes),
“SUNRISE 30"
(30
minute sunrise—Default), “
SUNRISE 45
” (45 minutes), or
“SUNRISE 60"
(60 minutes).
Figure 3 Programming Features
Prog
Button
Presses
DISPLAY RESULT
(First setting in bold is the default)
1
Alarm Set > 7:00 AM
2
Clock Set > 1:00 PM
3
More?
(-) end programming (+) on to other program options
4
Sunrise 30
> 45 > 60 > No Fade Up > 15
5
Wake Beep
> Wake Radio > Audio Off
6*
Alarm Radio Volume
– Adjusts the volume level for wake up time
7
Flashing Off
> Flashing On
8*
Wake Brightness
– Adjusts the maximum light brightness for wake up time
9
More?
(-) end programming (+) on to other program options
10
Sunset 30
> 45 > 60 > 15
11
Sound Fade Auto >
Sound On Perm > Fade 15 > 30 > 45 > 60 > 90
12
Night Light Off
> Low > High
13
More?
(-) end programming (+) on to other program options
14
Display Auto
> Low > High
15
12 Hour
> 24 Hour
16
Security Off
> On
17
Show No Date
> Show Date
18*
Day of the Week
>
Sun
> Mon > Tues > Wed > Thurs > Fri > Sat
19*
Year 2011
> Year 2000-2099
20*
Month
>
Jan
>Feb>March>April>May>Jun> July>Aug>Sept>Oct>Nov>Dec
21*
Day of Month
>
Day 1
-
31
22*
Show Date
> Day and Date
21
End programming and return to home screen
*Steps only available if you enable relevant settings, e.g. Radio Wake, Show Date, etc.
5
