The
EZ
Wake
T
T
M
M
SunRise
Alarm Clock is a naturally great way to fall asleep and
wake up every day. That’s because humans are programmed by nature to
wake to the rising sun and sleep when the sun goes down. Waking up to a
simulated sunrise can help you start the day feeling more refreshed and ready to
go. Falling asleep to a simulated sunset can help you relax and fall asleep
more easily. Please read the directions and familiarize yourself with the control
buttons and clock display to ensure you get off to a good start with your new EZ
Wake Clock.
Setting up the EZ Wake Clock
For best results, place the clock near your bed on a nightstand or bedside table
close to pillow level. Plug the clock into the nearest wall plug. NOTE: Until the
time has been set, or after a prolonged power outage, the clock display will flash on
and off to let you know the time needs to be set.
Setting the Time
Make sure the alarm (A) button is pressed in so the sun symbol (
Press and hold the program (P) button (display reads, “
setC
” for two seconds),
then use + and (-) buttons to adjust the time. The time moves rapidly
(–) button is held in. The PM “dot” is lit for PM and off for AM.
-1-
= ALARM SET
PM
= PM symbol
)
)
)
= BEEP symbol
A
= ALARM button
P
= PROGRAM button
+
= PLUS button
-
= MINUS button
Alarm Clock is a naturally great way to fall asleep and
wake up every day. That’s because humans are programmed by nature to
wake to the rising sun and sleep when the sun goes down. Waking up to a
start the day feeling more refreshed and ready to
go. Falling asleep to a simulated sunset can help you relax and fall asleep
more easily. Please read the directions and familiarize yourself with the control
ff to a good start with your new EZ
For best results, place the clock near your bed on a nightstand or bedside table
close to pillow level. Plug the clock into the nearest wall plug. NOTE: Until the
er a prolonged power outage, the clock display will flash on
Make sure the alarm (A) button is pressed in so the sun symbol (
) is not lit.
” for two seconds),
) buttons to adjust the time. The time moves rapidly if the + or
) button is held in. The PM “dot” is lit for PM and off for AM.
Changing to a 24 Hour Display
The clock is preset to a 12-hour display. To change to a 24
sure the A button is in so the sun symbol is not lit, then press and hold the P button
and press both + and (–) buttons at the same time. The display will read “
To switch back to a 12-hour display, follow the same procedure an
read “
12Hr
”. Note: the “PM” symbol dot is only lit in the 12
Using the Adjustable Reading Light
Press and hold the + button to turn the lamp up until it reaches the correct
brightness level. To reduce the light level or turn
Setting the Wake-Up Time
Make sure the A button is out so the sun symbol (
button, (the display reads “
SetA
” for a few seconds). Then adjust the alarm time
with + and (–) buttons until desired time is set (Note: default alarm time is 7:00
a.m.). Holding in the + or (–) button will cause the time to change rapidly.
Turning the Alarm On
Push the A button so it is out. The display will show the sun symbol (
wake up time will be displayed for a few seconds. If the light is on, it will slowly
fade out, or you can turn it off by pressing the (
Disabling the Beeper
The backup alarm beeper is preset “on” as indicated when the dot next to the Beep
symbol, “
)
)
)”, is lit. To disable the audible beeper, make sure the A button is
pushed out so the sun symbol (
) is lit, then press and
at the same time for about 6 seconds until the Beep symbol goes out (you will hear
a faint beep as the symbol goes out and the display reads, “
this, repeat the same procedure until the Beep symbol
beep as the symbol lights and the display reads, “
Activating the Sunset Sequence
The Sunset sequence lets the light fade down slowly to help you fall asleep.
Many people also find that it’s especially useful for small children, encouraging
them to shut their eyes and settle down. Manually turn the light on to the intensity
from which you wish the sunset to start. Then press the A button so it is out and the
sun symbol (
) is lit to begin the sunset. If the light is at full intensity it will take 30
minutes for the light to go out. The less bright the light is to start, the faster the
light will fade out.
Setting the Night Light
- (Blue Model Only)
In the blue EZ Wake SunRise Model, you can choose the Fade
option, by having the ALARM button out so the sun symbol (
PROGRAM button and, at the same time, the +
phrase “on nite lite” appears sequentially. If you do not want to use the night light
feature, push the buttons again so “off nite lite” appears.
-2-
= ALARM SET
= PM symbol
BEEP symbol
= ALARM button
= PROGRAM button
= PLUS button
= MINUS button
hour display. To change to a 24-hour display, make
sure the A button is in so the sun symbol is not lit, then press and hold the P button
) buttons at the same time. The display will read “
24 Hr
”.
hour display, follow the same procedure and the display will
”. Note: the “PM” symbol dot is only lit in the 12-hr mode.
Press and hold the + button to turn the lamp up until it reaches the correct
brightness level. To reduce the light level or turn it off, press the (-) button.
Make sure the A button is out so the sun symbol (
) is lit, then press and hold the P
for a few seconds). Then adjust the alarm time
) buttons until desired time is set (Note: default alarm time is 7:00
) button will cause the time to change rapidly.
Push the A button so it is out. The display will show the sun symbol (
) and the
wake up time will be displayed for a few seconds. If the light is on, it will slowly
fade out, or you can turn it off by pressing the (-) button.
The backup alarm beeper is preset “on” as indicated when the dot next to the Beep
)”, is lit. To disable the audible beeper, make sure the A button is
n press and hold both + and (–) buttons
at the same time for about 6 seconds until the Beep symbol goes out (you will hear
a faint beep as the symbol goes out and the display reads, “
nonE
”). To reverse
this, repeat the same procedure until the Beep symbol lights. You will hear a single
beep as the symbol lights and the display reads, “
beeP
”.
The Sunset sequence lets the light fade down slowly to help you fall asleep.
s especially useful for small children, encouraging
them to shut their eyes and settle down. Manually turn the light on to the intensity
from which you wish the sunset to start. Then press the A button so it is out and the
) is lit to begin the sunset. If the light is at full intensity it will take 30
minutes for the light to go out. The less bright the light is to start, the faster the
(Blue Model Only)
In the blue EZ Wake SunRise Model, you can choose the Fade-to-Nightlight
option, by having the ALARM button out so the sun symbol (
) is lit. Press the
PROGRAM button and, at the same time, the + and - buttons. Release when the
phrase “on nite lite” appears sequentially. If you do not want to use the night light
feature, push the buttons again so “off nite lite” appears.