Operation
1.
Press
Button
- Middle light is on.
2.
Left Turn - Green washing light is on.
3.
Right Turn - Pink light is on.
1. Installing the Battery
Remove the battery pack
by pulling
the tab.
Insert
2
AA batteries, and put battery pack
in the control box. Replace the cover firmly.
1.To ensure proper polarity AA Batteries must be
used
2.During initial installation and replacement of
Batteries,you must install based on the figure
provided above.
3.During long periods of non-use,it is recommended
to remove the batteries from the battery pack.
Note: Please check and clean battery contacts
prior to installation.
Single use AA Batteries are recommended.
2. Instructions
Return the battery back to the SlimGlow.
3. Replacing the battery
When the light turns red please replace the battery.
Pull Release Tab
Pull the release tab on the bidet, then remove. Repeat the steps
above to replace the batteries.
12.Light
I
nstructions
Slim
G
low
IMPORTANT! Water can spray when no one is sitting on the seat.
Do not activate the water until seated.
