6 | ENGLISH
CONNECTING JET NOZZLE / WIDE NOZZLE
WARNING: DO NOT attempt to connect any accessories while unit is emitting steam.
Doing so could result in burns or other injury.
1.
Insert cylinder on back of Jet Nozzle or Wide Nozzle (FIGURE 1-A) into opening of Steam
Aperture . Align it so that steam aperture into the holes of Jet Nozzle or Wide Nozzle .
Be sure to push accessory in as far as possible.
2.
Rotate Jet Nozzle or Wide Nozzle in a clockwise direction as indicated (FIGURE 2-A). Twist
until you feel it “lock” into place and it will move no further. Note that the single guide line
Aperture aligns between the dual guide lines on the Jet Nozzle / Wide Nozzle
above Steam
(FIGURE 2-B).
Assembling Your
Handheld Steam Cleaner
1-A
2-A
2-B
Summary of Contents for BioMIST EM-307
Page 15: ......
