16
2. Check the device for defective operating elements.
- Legibility of inscriptions and labels.
- make sure the inscriptions and labels are not distorted.
3. Check LED
- LED must be illuminated when switched on.
4. Check the usability of accessories.
- Patient cable undamaged.
- Electrodes undamaged.
Chapter 21: MALFUNCTIONS
Should any malfunctions occur while using the MAXEMS 1000, check :
1. Whether the switch/control is set to the appropriate form of therapy.
Adjust the control correctly.
2. Whether the cable is correctly connected to the device.
The cables should be inserted completely into the sockets.
3. Whether the impulse display LED is illuminated.
If necessary, insert a new battery.
4. For possible damage to the cable.
Change the cable if any damage is detected.
※ If there is any other problem, please return the device to your distributor.
Do not try to repair a defective device.
Chapter 22: WARRANTY
All MAXEMS 2000 models carry a warranty of one year from the date of delivery.
The warranty applies to the stimulator only and covers both parts and labor relating
thereto.
The warranty does not apply to damage resulting from failure to follow the operating
instructions, accidents, abuse, alteration or disassembly by unauthorized personnel.
Do not dispose of your used batteries with other
household waste.
Hand your used batteries over at a designated collection
point. If the device is not going to be used for a long
period of time, remove the batteries to avoid any damage
due to possible battery leakage.