Bio Medic Data Systems DAS-8010, User Manual, Page: 11 / 24

www.BMDS.com 1-800-526-BMDS or 302-628-4100 for Support Questions
RSP-8004 KEYPAD AND DISPLAY
11
RSP-8004 Keypad
AUTO
A press of the button will activate autoscanning mode. While in autos-
canning mode, the probe will search for and scan a transponder. After
2-3 seconds, the probe will automatically return to scanning. The length
of time for autoscanning can be configured using a similar option in the
new DASHost 8000 software. Please refer to use of the smart probe with
DASHost 8000 on page 16 of the manual.
As a secondary feature, if the AUTO button is press longer, the map
function will activate. Mapping allows for associating the read-only IMI
transponder code with a user-assigned unique ID code. Please refer to
mapping section for creating and loading a map file. The M LED will also
be lit to indicate mapping feature. Holding down the AUTO button again
will deactivate mapping.
BEEP
A press of the button will activate or deactivate confirmation tone for
scanning. If the button is press down longer, the duplicate filter will be
activated. The D LED light will also be lit to indicate duplicate filtering.
While in this mode, the probe will prevent accidental duplicate con-
secutive reading of the same transponder. If the same transponder is
scanned on the following scan, a beep will alert user. Holding down the
BEEP button again will disable the duplicate filter function.
SCAN
A press of the button will activate scan mode. While in scan mode, the
smart probe will actively search for nearby transponders. The blue LED
lights along the side of the reader will scroll along with the top light la-
beled S for scan being on. To deactivate scanning, press the button
again.
Power LED Indicator light. When lit, smart probe is being pow-
ered by reader.
Data Transmission LED. When lit, scan data is being transmit-
ted to connected computer
The RSP-8004 membrane keypad includes several diagnostic LED indicators and three preconfigured
membrane buttons. Besides the SCAN button, there are two additional buttons that will activate unique
functions depending on if the button is pressed or held down for longer.
NOTE
While in scan mode or while in autoscanning mode, DO NOT place the probe on
a metal surface. Doing so for a prolonged period can cause the probe to become
overheated and de-tuned. De-tuning will reduce operational effectiveness and shorten
the lifespan of the probe.