Press the hook for
6 seconds until the
blue light flashes
rapidly.
Touch and hold the sensor with the
first enrolled finger until you see a
solid blue light activates and stays on
for 2 seconds.
*if a red light flashes, please try again.
When the red and blue light
flashes, press the hook for 6
seconds again until the red
light flashes rapidly and then
release the hook.
Flashing red
and blue light
Touch the sensor while
the red light flashes
Enrollment of Additional Fingerprints
Press hook for
6 seconds until you
see a rapid flashing
blue light.
Touch the sensor with the first enrolled
finger until you see a blue light flashes for 2
seconds.
*if a red light flashes, please try again.
Wait till a red and blue
light is activated and
then you can begin to
enroll a new fingerprint.
6 sec
*Refer to “Fingerprint
Enrollment” section
Red and blue
light flash
Waiting for Blue
light to touch
Flashing blue light
Touch the sensor 5 times
Blue light flashes
for 2 sec
Touch the sensor 5 times for 5 successful
scans.
• you will see a blue light for 2 seconds
after each successful scan.
• If a red light flashes, please try again.
A solid blue light will be activated for 2 seconds
and lock hook would pop up and that indicates
finger is enrolled successfully!
Erase Fingerprint Records
6 sec
Waiting for Blue
light to touch
Flashing
blue light
Blue light flashes
for 2 sec
Touch the sensor with the first enrolled
finger when you see the rapidly
flashing red light.
Hold the finger untill you see the blue light
activates for 2 seconds and that indicates all the
enrolled fingerprints are erased successfully.