User
’
s manual and Safety Instructions
of The Bio Flame Fireplace
Keep this user
’
s manual carefully for the life of this product .This product is only sold in combination with it
’
s user
’
s manual.
Please read bellow instructions before putting your The Bio Flame to use. Make sure the guideline as provided are
followed.
The Bio Flame is meant for indoor/outdoor use. The recommended temperature radius: 10
°
C/50
°
F until 25
°
C/77
°
F
Installation of the wall mount series:
l
The Bio Flame is to be placed or hung on a fireproof foundation or wall.
l
When attaching to a wall, we advise you to keep a safety distance of 1 cm from the wall. N
l
Never remove the isolation layer on the backside.
l
Make sure that The Bio Flame is leveled when placed/hung horizontally as well as vertically. This is to make
sure that the liquid can not run out of the burner.
l
Keep a safety distance of at least 1 meter (on both the left-‐, right-‐ and front side) for objects. Keep
flammable objects (eg curtains, furniture or bookshelves) away from The Bio Flame.
l
Do not place The Bio Flame next to underneath, or on top of a windowsill.
l
Use The Bio Flame only in a draft-‐free room, otherwise soot can come into being. However, make sure that
there is some form of ventilation.
l
The Bio Flame delivers its own unique fuel: The Bio Flame bio ethanol. The Bio Flame can only function
optimally in the combination with this bio ethanol. Never use another liquid or gel to refill The Bio Flame. As
a consequence, the warranty will expire as well.
Installation of floor level The Bio Flame Fireplaces:
l
Make sure Bio Flame is kept at least 20 inches away from furniture and other obstructions.
l
Keep pets and small children away from The Bio Flame when operating.
Installation in an existing fireplace:
l
Place The Bio Flame in the therefore appointed space (make sure this is leveled). Minimum distance
necessary from the top of the burner: 50 cm for the big burner and 30 cm for the small burner.
Installation of the log set/pebbles
l
The Bio Flame has developed a special ceramic log set and pebbles for decoration purposes of The Bio Flame.
Place these around the fire opening (the white ceramic brick) of the burner. The fire opening should be
remained free. When the decoration material is placed in the flames, unnecessary soot will be formed. Do
not touch decoration material until this has cooled down for at least 30 minutes.
l
Never use any other decoration material for The Bio Flame besides The Bio Flame ceramic log set or pebbles.
Filling The Bio Flame with The Bio Flame bio ethanol
l
Use The Bio Flame bio ethanol ONLY to fill The Bio Flame
l
It is of great importance that the liquid never runs outside the filling opening. Make sure to fill The Bio Flame
carefully and slowly , so it can not be overfilled.
How to fill The Bio Flame
