Step 1 - Fuel
The Bio Fireplace Bio-Blaze
®
burns exclusively with bio-ethanol
liquid. This bio-ethanol requires caution; use only after reading all
the security instructions.
Carefully pour in the bio-ethanol into the burner(s). Use the provided.
The burner(s) can be filled up to ¾ level.
Make sure that the liquid does not spilled outside the burner. If it
is the case, wait several minutes until it evaporates before lighting
it.
USe OnLY BIO-eTHAnOL as of 95% ethanol
, suitable for the fireplace Bio-Blaze
®
.
Do not use gel or any petrol products: spirits, essence …
Do not mix the bio ethanol with other fuels; the Bio-ethanol is a (highly) inflammable product.
Avoid contact with the eyes and skin.
Do not stock the bio ethanol nearby a Bio Fireplace.
Do not use the Bio Fireplace Bio-Blaze
®
and its burner to cook food, to heat water or to grill meat.
Do not use the Bio Fireplace Bio-Blaze
®
and its burner if flammable gas is in the room.
Persons who have breathing problems needs to be advised by their doctors before use.
Step 2 - Lightning
To light the fire use a long lighter provided in the kit, or a long
match. With a normal lighter, you may risk burning injuries.
Do not place anything on the fire. Logs and stones should be
around the flame, not on the flame.
The bio-ethanol should be at room temperature when being
used.
Do not smoke while lighting the burners of the Bio Fireplace.
The burner is made from stainless steel, it will get hot; avoid contact with the stainless steel ele-
ment.
Never take the burner in your hands while it’s burning or if it is hot.
Never put your head above the burner while lighting it.
Never leave the bio ethanol bottle open next to a fireplace.
Never add bio ethanol while the fireplace is burning.
Never leave the Fireplace without surveillance. Put out the fire in case you would like to leave home
or go to bed.
In case of burning injuries, call your nearest doctor or hospital service. Do not apply any treatment on
the burn. See a doctor for a treatment.
Respect the law of your city in terms of the fire security. It is not recommended to burn a Bio-Blaze
®
near a tree or any flammable vegetation.
Never move the fireplace while it is burning.
USInG THe BIO FIRePLACe BIO-BLAze
®
InSTALLATIOn
Step 1
Install the Bio Fireplace only on a flat, horizontal and firm floor. Make sure not to expose the product
to intense movements. Never install the product in a draught.
Ensure that flammable products (curtains, furniture or other flammable materials) are not nearby the
fireplace.
Keep a safety distance of at least 1 meter or 3 foot (on the left-, right- and front side) for objects.
Keep a safety distance of at least 1 meter or 3 foot between fireplace and ceiling.
Step 2
Place the burner(s) in the insert/ opening.
Step 3
Use the provided metal bars and screws to fix the glass. Place the rubber protections underneath
the glass at both sides to avoid scratching the floor. Slide in the veniz and place it on the metal bars.
The Veniz is stabilized.
Step 4
If you are using decorative log set or ceramic stones make sure that they are heat resistant.
Make sure that stones or log sets are not placed in to the flame, the closing and opening space of
the burner needs to be clear and accessible.
If you are using the Bio-Blaze
®
stones, you need to wash the stones before using them with water
and soap. Let them dry. Now they are ready to be used.
enGLISH
enGLISH