EN - 18
8 Putting out of operation
ABIPLAS
®
WELD 100/150 POWDER W
• Setting of the maximum main flow.
7.1 Welding process
1
Open the shielding gas cylinder.
2
Switch on the power source.
3
Ignite the pilot arc.
The high-frequency ignition aid switches off automatically after igniting the arc.
4
Hold the welding torch above the workpiece in close proximity to it.
Maintain a distance of about 5 mm between the workpiece and the gas
nozzle.
5
Actuate the switching element on the handle and ignite the main arc.
6
Press the powder start key.
7
Start the welding process.
8 Putting out of operation
1
Switch off the powder delivery, main current and pilot current.
2
Switch off the power source.
3
Close the shut-off valves for the gas supply.
9 Maintenance and cleaning
Regular cleaning, however, is a prerequisite for a long life and a trouble-free
operation.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close the gas supply.
• Disconnect the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check that all live cables and connections are properly installed.
• Replace any damaged, deformed or worn parts.
