Motorized/Smart Zebra Shades
Instruction Manual
P5
BINTRONIC ENTERPRISE CO., LTD
No.62, Bengong 5th Rd., Gangshan Dist., Kaohsiung City 82059, Taiwan (R.O.C.)
Email: [email protected]
This instruction manual version is v1.0.
All Rights Reserved.
Copyright © 2022 Bintronic Enterprise
the Motor makes a twitch forward
and backward
When all the procedures are
done, only the password of this
remote remains, others will be
erased. If a new password is
not added, the old password
will not be erased.
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
STEP-1
STEP-1
Unplug power supply of the Motor, wait for 15 seconds, resume power
supply of it. Press [UP] + [STOP] + [DOWN] + either of the keys
[UPWARD LIGHT FILTERING] or [DOWNWARD LIGHT FILTERING]
altogether 4 keys within 8 seconds until the Motor makes a twitch.
STEP-1
STEP-2
After Motor makes a twitch, simultaneously press [UP] +
[DOWN] keys of the Remote Control within 8 seconds;
password is cleared off when the Motor makes a twitch.
4-1 Clear off Password
5-1 Externally connected Manual Switch Box
unplug power supply
wait for 15 seconds
resume power supply
press 4 keys altogether within 8 seconds
the Motor makes a twitch
forward and backward
When the Motor makes a
twitch, the Zebra Shade will
move upwards and
downwards at the same time
as a response.
yellow
red
brown
green
System
Manual Switch
A brief contact will activate the function;
DO NOT short-circuit continuously.
Green: Common
Brown: Up
Red: Stop
Yellow: Down
Manual Switch Function (code 2680 Type, code 2240 Type):
UP
STOP
DOWN
Press [UP] shortly, the full light transmittance mode of the Zebra Shade will be activated.
Press [UP] for 1 second, the Zebra Shade will be opened completely.
Press [STOP] shortly, the Zebra Shade will stop immediately.
When the Zebra Shade is fully closed, press [STOP] shortly,
the full light transmittance mode of the Zebra Shade will be activated.
When the full light transmittance mode is activated, press [STOP] for 1 second,
the Zebra Shade will be closed completely.
When the Zebra Shade is fully opened, press [STOP] for 1 second,
the Zebra Shade will be closed completely.
Press [CLOSE] shortly, the full light transmittance mode will be deactivated.
Press [CLOSE] for 1 second, the Zebra Shade will be closed completely.
(When the Zebra Shade is moving, press the key of another direction, it will stop immediately.)
1
2
1
2
1
2
3
4
Setting Completed
It’s the same as step 1-1 to 1-3.
