XAir
Getting Started
65
Connection to the Power Supply
10
Following the menu:
Figure 10-4:
The menu Setup
The following dialog box opens:
Figure 10-5:
The Setup dialog box
➤
Enter the network parameters (Node name, IP address, Netmask, and
Standard gateway) and confirm them with OK.
The parameter Node name must not have more than 32 printable characters of
the 7-bit ASCII character set without blanks and tabulators.
We recommend that you only use letters, digits, underscores, and hyphens for
the parameter Node name to avoid errors caused by other systems when inter-
preting this parameter.
