15.3 Options
You are in dial preparation. You wish to use the options.
Press the OK key.
You are then in the
menu.
Use the Navigator to select:
$
: Your system telephone's microphone is switched off. If there is
a connection, you can switch the microphone back on under
.
#
Your number is not sent to the party dialled.
"
: You can select the external call number that will be sent to the party di-
alled.
Confirm your selection with the OK key.
If you had dialled "Use number", you can use the Navigator to select the number you
want.
Confirm your selection with the OK key. You are back in dial preparation.
Other options for dialling when the receiver is replaced
It is also possible to dial a number when the receiver is replaced and to correct or supplement a call number before
dialling when calling:
• From the redial memory (see
on page 63).
• From the call list (see
on page 35).
• From the phone book (see
on page 37).
• Using the function keys (see
on page 25).
15.4 Call connection
During an existing call connection, the following functions can be executed using the
menu.
$
or
$
: If you microphone is switched off,
the person you are speaking to cannot hear you.
: The call is disconnected and your system telephone goes back to dial pre-
paration.
$*
,
5
: Select the function you want. The tick at the end of the row indicates
which function is switched on.
: You can use the phone book to trigger an enquiry (see
on
page 37).
Confirm your selection with the OK key.
15 Dialling
bintec elmeg GmbH
60
System telephones elmeg S560 / elmeg S530
