Chapter 5 System telephone installation
System telephone underside
System telephone
elmeg S560 or elmeg S530 display
Holder inserted into bracket
Connection plug module (connection sockets for S0 / Up0)
Mini USB connection (latest release)
Headset connector with cable guide
Receiver connector (handset) with cable guide
Connection socket for extension
Connector for the plug power supply unit for the elmeg T500 extensions with cable guide.
Mount for elmeg T500.
Cable retainer
5.1 Connect the system telephone
In order to operate your system telephone, you must insert the cords for the telephone connector and the receiver.
5.1.1 Connection module (connection sockets for S0 / Up0)
The socket for selecting the connection is located on the underside of the system telephone. Here you can select
between the S0 and Up0 connection. To do this, you press the module's two clips
together, take the module out
and, depending on the connection type, turn it round and put it back in.
S0 connector
5 System telephone installation
bintec elmeg GmbH
6
System telephones elmeg S560 / elmeg S530
