Field
Description
Note
When the DHCP lease expires or when the device is re-
started, the routes that consist from the combination of DH-
CP settings and those made here are initially deleted once
more from the active routing. If the DHCP is reconfigured
they are re-generated and re-activated.
Interface
Select the interface to be used for this route.
Route Class
Select the type of Route Class.
Possible values:
•
(default value): Defines a route with the default
parameters.
•
6
: Select whether the route is to be defined with ex-
tended parameters. If the function is active, a route is created
with extended routing parameters such as source interface
and source IP address, as well as protocol, source and des-
tination port, type of service (TOS) and the status of the
device interface.
Fields in the menu Route Parameters
Field
Description
Local IP Address
Only for Route Type =
-13+ ?3 1*
,
> ?3 1*
or
92B ?3
1*
Enter the own IP address of the router on the selected interface.
Destination IP Ad-
dress/Netmask
Only for Route Type
> ?3 1*
or
9
2B ?3 1*
Enter the IP address of the destination host or destination net-
work.
When Route Type =
92B ?3 1*
Also enter the relevant netmask in the second field.
bintec elmeg GmbH
11 Networking
be.IP 4isdn
143
