The menu Physical Interfaces->DSL Modem->DSL Configuration consists of the follow-
ing fields:
Fields in the DSL Port Status menu.
Field
Description
DSL Chipset
Shows the key of the installed chipset.
Physical Connection
Shows the current ADSL operation mode. The value cannot be
changed.
Possible values:
•
/B2
: The ADSL link is not active.
•
,9 )
: ANSI T1.413
•
,-$
: ADSL classic, G.DMT, ITU G.992.1
•
+
: Splitterless ADSL, ITU G.992.2
•
,-$
: G.DMT.Bis, ITU G.992.3
•
,-$ - $)
: ADSL2 Double Ended Line Test
•
,-$ +3
: ADSL2 Plus, ITU G.992.5
•
,-$ +3 - $)
: ADSL2 Plus Double Ended Line Test
•
? ,-$
: Reach Extended ADSL2
•
? ,-$ - $)
: Reach Extended ADSL2 Double Ended Line
Test.
•
,-$ )/) ,6 .
•
,-$< )/) ,6 .
•
,-$ ,6 F
•
,-$< ,6 F
Fields in the Current Line Speed menu.
Field
Description
Downstream
Displays the data rate in the receive direction (direction from
CO/DSLAM to CPE/router) in bits per second.
The value cannot be changed.
Upstream
Displays the data rate in the send direction (direction from CPE/
router to CO/DSLAM) in bits per second.
The value cannot be changed.
bintec elmeg GmbH
8 Physical Interfaces
be.IP 4isdn
87
