Binks DX200-3 Service Manual Download Page 3

EN

In this part sheet, the words WARNING, CAUTION and NOTE are used to emphasize important safety information as 
follows: 

STATIC CHARGE. Fluid may develop a static charge that must be 
dissipated through proper grounding of the equipment, objects to be 
sprayed and alll other electrically conductive objects in the dispensing 
area.  Improper grounding or sparks can cause a hazardous condition 
and result in fire, explosion or elecrtic shock and other serious injury.

NEVER MODIFY THE EQUIPMENT. Do 
not modify the equipment unless the 
manufacturer provides written 
approval.

PROP 65 WARNING. WARNING:This product contains chemicals 
known to the state of California to cause cancer and birth defects or 
other reproductive harm.

PINCH POINT HAZARD. Moving parts 
can crush and cut.  Pinch points are 
any areas where ther are moving 
parts.

DE-ENERGIZE, DE-PRESSURISE, DISCONNECT AND LOCK OUT ALL 
POWER SOURCES DURING MAINTENANCE. Failure to de-energize, 
disconnect and lock out all power supplies before performing 
equipment maintenance could cause serious injury or death.

KNOW WHERE AND HOW TO SHUT 
OFF THE EQUIPMENT IN CASE OF AN 
EMERGENCY.

NOISE LEVELS. The A-weighted sound level of pumping and spray 
equipment may exceed 85 dB(A) depending on equipment settings. 
Actual noise levels are available on request.  It is recommended that 
ear protection is worn at all times while equipment is in use.

WEAR SAFETY GLASSES. Failure to wear safety glasses with side 
shields could result in serious eye injury or blindness.

Read the following warnings before using this equipment.

READ THE MANUAL. Before operating finishing equipment, read and 
understand all safety, operation and maintenance information 
provided in the operation manual.

AUTOMATIC EQUIPMENT. Automatic 
equipment may start suddenly without 
warning.

OPERATOR TRAINING. All personnel 
must be trained before operating 
finishing equipment.

INSPECT THE EQUIPMENT DAILY. Inspect the equipment for worn or 
broken parts on a daily basis. Do not operate the equipment if you 
are uncertain about its condition.

EQUIPMENT MISUSE HAZARD. Equipment misuse can cause the 
equipment to rupture, malfunction or start unexpectedly and result in 
serious injury.

PACEMAKER WARNING. You are in the 
presence of magnetic fields which may 
interfere with the operation of certain 
pacemakers.

HIGH PRESSURE CONSIDERATION. High pressure can cause serious 
injury.  Relieve all pressure before servicing. Spray from the gun, 
hose leaks or ruptured components can inject fluid into your body 
and cause extremely serious injury.

KEEP EQUIPMENT GUARDS IN PLACE. 
Do not operate the equipment if the 
safety devices have been removed.

PRESSURE RELIEF PROCEDURE. 
Always follow the pressure relief 
procedure in the equipment instruction 
manual.

WARNING

CAUTION

NOTE

Hazards or unsafe practices which could result in 

severe personal injury, death or substantial property 

damage.

Hazards or unsafe practices which could result in 

minor personal injury, product or property 

damage

IT IS THE RESPONSIBILITY OF THE EMPLOYER TO PROVIDE THIS INFORMATION TO THE 

OPERATOR OF THE EQUIPMENT.

PROJECTILE HAZARD. You may be 
injured by venting liquids or gases that 
are released under pressure, or flying 
debris.

Important installation, operation or maintenance 

information.

WARNING

77-3220-R1.1

3/12

www.carlisleft.com

Summary of Contents for DX200-3













Reviews: