Binks AA4400A, Operation Manual

Page: 3 / 17

© 2013 Finishing Brands UK Ltd.
3
Operation Manual
AA4400A Automatic
Air Assisted Airless Spraygun
Important - Read and follow all instructions and Safety Precautions before using
this equipment.
1
-
Specification & Materials of construction
Thread Pressure
Fluid inlet & fluid recirculation
¼ NPS Female
Max 275 Bar / 4000 psi
Air inlet P Length ¼ BSP Female
Max 10 Bar / 145 psi
Cylinder/trigger
M5 Female
4 to 10 bar / 60 to 145 psi
Maximum temperature in use 85° C / 185 °F
Spray gun weight 989 g / 31.6 oz.
Materials of construction
Gun body Aluminium hard anodized
Tip / Needle / Spray head/ Base plate Stainless steel 303 / 17-4 & Tungsten Carbide
Fluid seals Viton Extreme, Polyethylene
IMPORTANT : These Sprayguns are suitable for use with both waterbased and solvent based
coating materials. These guns are not designed for use with highly corrosive and/or abrasive
materials and if used with such materials it must be expected that the need for cleaning and/or
replacement of parts will be increased. If there is any doubt regarding the suitability of a specific
material, contact your Binks Distributor or Binks direct.
NOTE: This gun is not to be used with halogenated hydrocarbon solvents or cleaning agents such
as 1,1,1,-Trichloroethane or methylene chloride. These solvents can react with the aluminium
components used in this gun and cup. The reaction can become violent and lead to an equipment
explosion.
EC Declaration of Conformity
We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK , as the
manufacturer of the Spray gun model AA4400A, declare, under our sole responsibility that the equipment
to which this document relates is in conformity with the following standards or other normative documents:
BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection requirements
of Council Directive 98/37/EEC relating to Machinery Safety Directive , and;
EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective Systems intended for
use in Potentially Explosive Atmospheres protection level II 2 G X .
D. Smith , General Manager
2
nd
September 2013
Finishing Brands UK Limited reserves the right to modify equipment specification without prior notice.