background image

EN

77-2875-R7.2  (6/2015)

7 / 8

ACCESSORIES

Consists of :

  

1 - Piercing Tool  

48 - Disposable Liners  

48 - Drain Bushings

OMX-70-K48  

Paint Cup Liner Kit 

Allows quick & easy clean-up. 

Cleaning Brushes  

42884-214-K5 (3/8")

42884-215-K10 (5/8")

These brushes are helpful in 
cleaning threads and recesses 
of gun body.

Compatible with all paint materials; 

contains no silicone or petroleum 

distillates to contaminate paint. 

MSDS  Sheet available upon request.

HC-4700

1/4" NPT(F)

HC-1166

1/4" NPT(M)

HC-4699

1/4" NPT(M)

HC-4419  

1/4" NPS(F)

Industrial Quick Connects  

for HVLP Guns (Air)

Spray Gun Lube  

SSL-10-K12 (2 oz. bottle)

These gravity feed cups 
are designed to be used 
with EXL, FLG, Compact, 
SV100, 95G and M1-G 
gravity feed spray guns.

GFC-501 (Acetal) 20 Oz. Cup

54-4720 (Aluminum) 1-Liter Cup

Gravity Feed Cups

CUP SYSTEM

ADAPTER

DeKups Cup System & Adapter

DPC-607  Reusable Cup 9 oz – Kit of 2
DPC-606  Reusable Cup 24oz – Kit of 2
DPC-608  Reusable Cup 34 oz – Kit of 2

DPC-602  Disposable Cup 9 oz – Kit of 32
DPC-601  Disposable Cup 24 oz – Kit of 32
DPC-600  Disposable Cup 34 oz – Kit of 32

DPC-31 Adapter

U.S. Patent Nos. 6,820,824 and 7,374,111 owned by 3M Innovative Properties Co. 

Additional U.S. Patents: Nos. 7,380,680; 7,354,074; 7,353,964; 7,350,418; 7,344,040; 7,263,893; 7,165,732; 7,086,549.

HAF-507 

Whirlwind™

In-Line Air Filter

Removes water, oil, and debris 
from the air line.

29-3100-K6 Scrubs

®

  

Hand Cleaner Towels

Scrubs

®

 are a pre- 

moistened hand cleaner 
towel for painters, body men 
and mechanics that go 
where you go and no water 
is needed.

KGP-5-K5  

Paint Filter Kit (Gravity)

Gravity cup strainers, 50 mesh, 

package of 5.

NIOSH-Certified for respiratory 

protection in atmospheres not 

immediately dangerous to life.

Paint Spray Respirators

40-141 (Sm) 

40-128 (Med) 

40-143 (Lg)

 

GFC-404-K2  

Disposable Lid Kit 

KGP-13-K5  

Gasket 

Seals gravity cup to gun.  

Kit of 5.

Kit of 2.

Summary of Contents for 7042-6931-4









Reviews: