EN
e.g.,
• Suction - Ø38 I.D. [-1 to 10 bar working pressure]
• Ensure the gearbox is filled with oil.
(The gearbox is filled with the correct amount of oil at the factory)
INSTALLATION
The vent plug is supplied in a bag attached to the gearbox.
• Check that the oil plug on top of Gearbox has been replaced with the correct venting plug.
• Ensure adequate air space around the Pump for maintenance and electric motor cooling requirements.
• Attach suitable flexible hoses to the inlet and outlet connections.
• Outlet - Ø32 - 38 I.D. [20 bar working pressure]
77-3228 R3.3
8/36
www.carlisleft.com
