EFIS
®
4
8
Components
Ten splashproof LEDs provide a bright illumination of the inspection area. The unit has an
ergonomic design: the telescopic handle can be adjusted to suit tall or short operators and
to reach far under large vehicles.
The LEDs are powered by 3 disposable 1.5 V C-cell batteries (IEC no. LR 14).
Upon request rechargeable NiMH batteries and a suitable charger are available as optional
accessory.
3. cOmpOnEntS
This section informs you about the parts from which the EFIS
®
4 inspection mirror
is built as well as the features that you can use to unambiguously identify the unit.
3.1 Components
The EFIS
®
4 Vehicle inspection mirror consists of the following components:
➊
Mirror chassis 200 x 300 mm with three rollers and LED illumination (10 LEDs)
➋
Telescopic handle with controls and integrated battery compartment
•
Operating instructions (not shown)
Battery operation:
➌
3 x 1.5 V C-cells (IEC LR14)
rech. battery operation (accessory part):
➌
3 x rechargeable 1.2 V NiMH
C-cell batteries, 4500 mAh
➍
ACS 110 charger for 3 x 1.2 V
NiMH 4500 mAh with charging cable
EFIS
®
4 components
➊
➋
➌
➍
