Binder KBF-S 240, Operating Manual

Page: 31 / 89

KBF-S (E6) 08/2018 page 31/88
7. Temperature and humidity set-point entry
Required access level: “User”.
Setting ranges Control ranges
Temperature
-5 °C / 23 °F up to 70 °C /
158 °F.
0 ºC / 32 °F up to 70 °C / 158 °F without humidity
10 °C / 50 °F up to 70 °C / 158 °F with humidity
Humidity 10 % r.h. up to 80 % r.h.
10 % r.h. to 80 % r.h.
See climatic diagram, chap. 18.
For the control range of temperature and relative humidity, see the temperature / humidity diagram chap.
18).
With safety controller mode “ Limit ”, adapt the safety controller always when you changed the
temperature set-point. Set the safety controller value by approx. 2 °C to 5 °C above the tem-
perature set-point (chap. 10.2).
Recommended setting: safety controller mode “ Offset ” with safety controller value 2 °C.
When operating without humidity by activated function “Humidity off” (chap. 8), set the humidi-
ty tolerance range to “0” in order to avoid tolerance range alarms (chap. 12).
7.1 Temperature set-point entry
Path: Normal display Setpoints Temperature
Press the OK button to enable the setting.
Temperature setting.
The current setting flashes. Enter the desired set-point with the arrow
buttons .
Confirm the entry with the OK button .
Temperature
With the arrow-down button you can continue with the humidity set-point entry (chap. 7.2).
With the Back button you can go back to the “ Setpoints ” submenu and, repeatedly pressing it, to Nor-
mal display .
7.2 Humidity set-point entry
Path: Normal display Setpoints Humidity
Press the OK button to enable the setting.
Humidity setting
The current setting flashes. Enter the desired set-point with the arrow
buttons .
Confirm the entry with the OK button .
Humidity