Binder KB 23, Operating Manual

Page: 60 / 87

KB 23 / KB 23-UL (E3.1) 02/2019 page 60/87
16. Options
16.1 APT-COM™ 4 Multi Management Software (option)
The chamber is regularly equipped with a serial interface RS 422 (13) that can connect the BINDER APT-
COM™ 4 Multi Management Software. The connection to a computer is established using the chamber
interface via an interface converter.
Confirm that the interface mode is correctly set to “Modbus” in the user level (chap. 10).
The actual temperature, and fan speed values are given in adjustable intervals. Programming can be
performed graphically via PC. Up to 100 chambers can be cross linked. For further information, refer to
the APT-COM™ 4 operating manual.
Pin allocation of the RS 422 interface (13) at the chamber rear: Pin 2: RxD (+)
Pin 3: TxD (+)
Pin 4: RxD (-)
Pin 5: TxD (-)
Pin 7: Ground
16.2 Data logger kit (option)
The BINDER Data Logger Kit offers an independent long-term measuring system for temperature,
available for different temperature ranges.
The BINDER Data Logger is equipped with a keyboard and a large LCD display, alarm functions and a
real-time function. Measurement data are recorded in the Data Logger and can be read out after the
measurement via the RS232 interface of the Data Logger. It offers a programmable measuring interval
and permits storing up to 64000 measuring values. Reading out is done with the Data Logger evaluation
software. You can give out a combined alarm and status protocol directly to a serial printer.
Data Logger Kit T 220: Measuring sensor for the temperature values of the chamber: Temperature range
-90 °C / 194 °F up to +220 °C / 428 °F.
For detailed information on installation and operation of the BINDER Data Logger, please
refer to the mounting instructions Art. No. 7001-0204 and to the original user manual of the
manufacturer, supplied with the data logger.