Binder 9020-0402, Translation Of The Original Operating Manual

Page: 96 / 173

MK LIT (E5) 01/2021 page 96/172
“Ramp” and “Step” mode example (representation of a temperature course)
W/°C
t/min.
0
20
40
60
80
100
10 30 40 60 70 100 130
1 2 3 4 5 6 7 8
Corresponding program table
Section No.
Duration
[hh:mm:ss]
Temperature
[°C]
Ramp or Step
1 00:10:00 40.0 Step
2 00:20:00 60.0 Step
3 00:10:00 80.0 Step
4 00:20:00 40.0 Step
5 00:10:00 40.0 Ramp
6 00:30:00 80.0 Ramp
7 00:30:00 80.0 Ramp
8 00:00:01 20.0 Ramp
17.7.3 Special controller functions via operation lines
You can define the switching state of up to 16 operation lines (control contacts). They are used to activate
/ deactivate special controller functions.
• Operation line “Idle mode” activates / deactivates the operating mode “Idle mode”.
•
Operation lines „Switching output 1“ up to „4“ can be used to turn on and off any equipment connected
to the zero-voltage switching outputs (DIN sockets (17) and (18) (option, chap. 25).
• Operation line “Compressed air valve” serves to open the solenoid valve of the compressed air connec-
tion (for optional compressed air connection, chap. 26.5)
•
Operation line “Anti-condensation protection” serves to switch the anti-condensation protection (chap.
24).
The other operation lines are without function.