background image

17

If the call is from someone who withheld their number, e.g. by dialling 141,

will display. 

If the call is from someone whose number is unavailable, e.g. an international 

call or from a private exchange, 

“OUT OF AREA”

 will display. 

If you've got new Caller Display records, the handset will display "X NEW 

6.1  View the Call List 

All received calls are saved in the Call List with the latest call at the top of the list.  

When the call list is full, the oldest call will be replaced by a new call.  Any 

unanswered calls which have not been viewed are marked with a <*> icon at the 

CALLS" in standby mode. The New Calls indication will remain until all the new 

call records have been viewed.

centre of the bottom line of the display. 

1. Press <UP> to access the call list.

OR Press <MENU> and <UP/DOWN> to show CALL LIST, the press OK. 

2. Press <UP/DOWN> to select the desired entry. 

3. Press <#> to view the caller’s number if applicable. 

6.2  Store a Call List Number into the Phonebook 

1.  Follow Steps 1 and 2 in Section 6.1. 

2.  Press <MENU> and <UP/DOWN> to show 

ADD TO PB.

3.  Press <OK> and then enter the name. 

4.  Press <OK> and the selected call list number is displayed. 

5.  Edit the number if necessary. 

6.  Press <OK> and <UP/DOWN> to select the ringtone. 

7.  Press <OK> to store the phonebook entry and return to the calls list. 

4. Press <MENU>, <UP/DOWN> to show DETAILS, and then <OK> to display 

the date and time of the call. Press <OK> to go back to the previous screen.

6.3  Delete an entry in the Call List 

1.  Follow Steps 1 and 2 in Section 6.1. 

2.  Press <MENU> and <UP/DOWN> to select DELETE.

3.  Press <OK> to confirm. 

6.4  Delete 

 

1.  Follow Steps 1 and 2 in Section 6.1

2.  Press <MENU> and <UP/DOWN> to select DELETE ALL .

3.  Press <OK> to display <CONFIRM?>.

4.  Press <OK> to confirm. All entries will be deleted and the display will show 

<EMPTY>. 

7 PHONE 

SETTINGS 

Your phone comes with a selection of settings that you can change to 

personalise your phone the way you like it to work.  

 

7.1  Date and Time Settings 

If you subscribe to Caller Display the time and date settings will be automatically 

 updated by the

 The Caller Display service only sends the month and date, not the year, so you 

may need to set the year. 

7.1.1  Change the Date Format 
1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS.

2.  Press <OK> and <UP/DOWN> to select 

DATE & TIME.

3.  Press <OK> and <UP/DOWN> to select 

DATE FORMAT.

18

4.  Press <OK> and <UP/DOWN> to select your desired date format 

(DD-MM-YY

or 

MM-DD-YY

).

5.  Press <OK> to confirm. 
7.1.2  Change the Time Format 
1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS. 

2.  Press <OK> and <UP/DOWN> to select 

DATE & TIME.

 

3.  Press <OK> and <UP/DOWN> to select 

TIME FORMAT.

4.  Press <OK> and <UP/DOWN> to select your desired time format 

5.  Press <OK> to confirm. 

7.1.3  Set the Time 

1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS.

 

2.  Press <OK> and <UP/DOWN> to select 

DATE & TIME.

 

3.  Press <OK> and <UP/DOWN> to select 

SET TIME.

4.  Press <OK> and then enter the time information in 24 hour format.

5.  Press <OK> to confirm. 

Note: If time has been set before, the current time will display, otherwise, 

“HH:MM”

 will display. 

7.1.4  Set the Date 

1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS.

 

2.  Press <OK> and <UP/DOWN> to select 

DATE & TIME.

 

3.  Press <OK> and <UP/DOWN> to select 

SET DATE. 

4.  Press <OK> and then enter the date information.  The date entered will be in 

5.  Press <OK> to confirm. 

Note: 

If date has been set before, the current date will display, otherwise,

the date entered will be in the format you set in Section 7.1.1.

 “

DD-MM-YY 

” will display. 

7.2 Alarm 

Settings 

You can set an alarm time on this phone.  When an alarm is set, the <ALARM 

Icon> is shown on the handset display.When the alarm time is reached, the

 <ALARM icon> and “

ALARM ON

” flash on the handset display, and the alarm 

tone rings for 45 seconds.  You can press any key to disable the alarm. If the 

snooze function is activated, the alarm will sound again at the end of the snooze 

period of seven minutes.  You can also press and hold  <TALK OFF> while the 

Note: 

a.  A key press will still disable the alarm even if the handset keypad is locked 

b.  The alarm volume level is the same as the settings of the handset ringer 

volume.  If the handset ringer is set to 

VOLUME OFF

, the alarm still sounds 

at 

VOLUME 1

level. 

when the alarm rings.

 (

12 HR

 or 

24 HR

). 

19

c.  During an external call or internal call, if an alarm is set and when the alarm 

time is reached, the <ALARM icon> and 

“ALARM ON”

 will still flash.  An 

alarm tone will be emitted from the earpiece to alert the user the  alarm time 

is reached.  Once the user presses any key or presses and holds.

d.  During paging or ringing, the alarm will not sound when the alarm time is 

reached.  However, if the snooze function is enabled and there is no paging 

7.2.1  Turn on/off the Alarm  
1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS.

2.  Press <OK> and <UP/DOWN> to select 

ALARM.

4.  Press <OK> to confirm. 

Note:

 If ON is selected, you will be asked to set the alarm time. 

7.2.2  Set the Alarm Time (If Alarm time is set to be ON)

1.  Follow Steps 1 to 4 in Section 7.2.1.

 

2.  Enter the alarm time in 24 hour format.

3.  Press <OK> to display "SNOOZE".

4.  Press <OK> and <UP/DOWN> to select snooze 

ON 

or 

OFF.

5.  Press <OK> to confirm. 

7.3 Handset 

Settings

7.3.1  Set the Ringer Melody for Internal Calls 

1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS. 

2.  Press <OK> and <UP/DOWN> to select 

RING SETUP

3.  Press <OK> and <UP/DOWN> to select 

INT RING.

4.  Press <OK> and <UP/DOWN> to select the melody you want to hear for 

Note:

 The respective melody will be played while browsing the ringtone list. 

5.  Press <OK> to confirm.

3.  Press <OK> and <UP/DOWN> to select 

ON/OFF.

<TALK OFF> to 

disable 

 

the alarm, the display will revert to the call duration.

or ringing, the alarm will sound again at the end of the snoo

.

internal calls.

7.3.2  Set the Ringer Melody for External Calls 
1.  Press <MENU> and <UP/DOWN> to select

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select 

RING SETUP

3.  Press <OK> and <UP/DOWN> to select

EXT RING.

4.  Press <OK> and <UP/DOWN> to select melody you want to hear for external 

Note:

 The respective melody will be played while browsing the ringtone list. 

5.  Press <OK> to confirm. 
7.3.3  Set the Ringer Volume 
1.  Press <MENU> and <UP/DOWN> to select

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select 

RING SETUP

3.  Press <OK> and <UP/DOWN> to select 

RING VOLUME

4.  Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of  

6 ringer volume levels including 

VOLUME OFF

). 

Note: 

The respective ringer volume will be played during your selection. 

If 

VOLUME OFF

 is selected, the <Ringer Off> icon will be displayed. 

5.  Press <OK> to confirm.
7.3.4  Set Alert Tones 
Three different alert tones are set on by default, but can be turned off, if desired. 

Key Tone - a single beep is emitted when you press a key. 

you need to charge the handset batteries. 

1.  Press <MENU> and <UP/DOWN> to select

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select

TONE SETUP.

3.  Press <OK> and <UP/DOWN> to select

KEY TONE / BATTERY TONE / 

4.  Press <OK> and <UP/DOWN> to turn on or off these tones. 

5.  Press <OK> to confirm. 

Out of Range Tone - emitted while you are talking on the phone to alert you to  

move  loser to the base unit, before the call is lost.

Low Battery Tone - emitted while you are talking on the phone to alert you that 

OUT OF RANGE.

7.3.5  Set the Handset Language 
1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select

LANGUAGE.

3.  Press <OK> and <UP/DOWN> to select the desired language. 

4.  Press <OK> to confirm. 

7.3.6 Rename 

the 

Handset 

1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select 

RENAME HS. 

3.  Press <OK> and change the name of your handset, using <C/MUTE> to delete 

4.  Press <OK> to confirm. 

letters and the alphanumeric keys to enter up to 10 letters for the name.

7.3.7  Choose the Information to be Displayed in Idle 

You can choose to display time or handset name in your idle screen. 

1.  Press <MENU> and <UP/DOWN> to select 

HS SETTINGS

2.  Press <OK> and <UP/DOWN> to select

HS DISPLAY. 

3.  Press <OK> and <UP/DOWN> to select 

HANDSET NAME

 or 

TIME

4.  Press <OK> to confirm. 
7.3.8  Set the Auto Answer  
If you turn on the Auto Answer, you can answer a call automatically by just lifting

1.  Press <MENU> and <UP/DOWN> to select

HS SETTINGS.

2.  Press <OK> and <UP/DOWN> to select

AUTO ANSWER. 

3.  Press <OK> and <UP/DOWN> to turn on or off the auto answer feature. 

4.  Press <OK> to confirm. 

the handset off the base or charger, without having to press any key.

calls.

21

20

7.4 Base 

Settings 

7.4.1

De-register a Handset 

This operation should only be necessary if one of your handsets becomes faulty 

or lost and needs to be replaced.

You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to 

Note:

 You cannot de-register the handset that you are currently using. 

1.  Press <MENU> and <UP/DOWN> to select

BS SETTINGS

2.  Press <OK> and <UP/DOWN> to select

DELETE HS.

3.  Press <OK> and the display shows "PIN?".

the antenna icon flashing and "REGISTER" on the display.

de-register a handset from the base station.A de-registered handset will have 

22

4.  Enter the 4-digit system PIN. 

5.  Press <OK> and the first handset number is displayed.

6.  Press <UP/DOWN> to scroll through the list of registered handsets and  

7.  Press <OK> to confirm, and the chosen handset will be de-registered. 

select the number of the handset

 

you want to de-register. 

 network when you receive an incoming call.

7.4.2  Change the dial mode 

1.  Press <MENU> and <UP/DOWN> to select

BS SETTINGS

2.  Press <OK> and <UP/DOWN> to select

DIAL MODE.

3.  Press <OK> and <UP/DOWN> to select 

TONE 

or

 PULSE 

(The current setting is indicated by an asterisk to the right).

4.  Press <OK> to confirm. 

You should normally leave the dialling mode at its default setting of TONE (also 

called DTMF) unless the phone is connected to an old exchange that only 

Note: 

If PULSE dialling is set, you can press the * key to switch to TONE dialling 

recognises

 PULSE 

dialling.

for the rest of that call.

7.4.3  Change the Flash (Recall) Time

1.  Press <MENU> and <UP/DOWN> to select

BS SETTINGS.

2.  Press <OK> and <UP/DOWN> to select

FLASH TIME.

3.  Press <OK> and <UP/DOWN> to select your desired flash time (

SHORT, 

4.  Press <OK> to confirm. 

You may need to change the recall (flash) time if your phone is connected to a 

PBX. The recall time options are  SHORT (the default value of 100ms), MEDIUM

( 0ms) or

 

LONG (600ms).

MEDIUM,

7.4.4  Change the System PIN Code 
A 4-digit system PIN code is used for changing the system settings of the base  

station. It is used to protect your phone against unauthorized use. The default

system PIN code is 0000.
1.  Press <MENU> and <UP/DOWN> to select

BS SETTINGS

2.  Press <OK> and <UP/DOWN> to select 

CHANGE PIN

3.  Press <OK> and you are requested to enter the 4-digit system PIN. 

4.  Enter the old system PIN. 

5.  Press <OK> and enter the new system PIN. 

6.  Press <OK> and enter the new system PIN again. 

Note:

 If the new PIN entered in Step 6 is not the same as the new system PIN 

entered in Step 5, you must enter the new system PIN at step 5 again.
7.  Press <OK> to confirm

“WITHHELD” 

7.5 Registration 

registered to your base, so you do not need to register them. 

You can register additional handsets to have up to five handsets per base unit,

with each handset's number (1 to 5)  shown on its display. (Note: each handset 

1.  Press and hold <PAGE> on the base station for more than five seconds, to

put the base station  into registration mode. It will stay in registration mode  

To register a new handset to your base:

within this time.

2.  Press <MENU> and <UP/DOWN> to select

REGISTRATION.

3.  Press <OK> and you are requested to enter the 4-digit system PIN. 

4.  Enter the 4-digit system PIN. 

5.  Press <OK> to confirm, and the display will show SEARCHING. 
If the handset registration is successful, you will hear a confirmation tone and the 

<antenna icon> will stop flashing.  
The handset will automatically be allocated the next available handset number.  

This handset number is shown in the handset display in standby mode.  If the

handset registration is unsuccessful, the <antenna icon> will still flash. 

7.6 Reset 

Your 

Phone 

You can reset your phone to the default settings .  After a reset, all your personal 

settings, call list entries, redial list entries, and answering machine messages will 

1.  Press <MENU> and <UP/DOWN> to select 

DEFAULT.

2.  Press <OK> and you are requested to enter the 4-digit system PIN. 

3.  Enter the 4-digit system PIN. 

4.  Press <OK> to display CONFIRM? 

5.  Press <OK> to confirm, and the phone will be reset to its default settings.

23

24

can only be registered to one base.)

for about 1 minute, so the following handset sequence must be completed 

unchanged. 

DECLARATION OF CONFORMITY

 

25

UK (BTP) Ver  , 

 200

             

CALLER DISPLAY (NETWORK DEPENDENT) 

This feature is available if you have subscribed to the Calling Line Identification 

service with your network service provider.  Your phone can store up to 10 

received calls with date/time information in the Call List.  The number will be 

shown on the handset display when the phone is ringing.  If the number matches 

with one of the entries in your Private Phonebook, the caller’s name stored in the  

private phonebook will be displayed alternately with the number, and the

handset will ring with the ringtone associated with that phonebook entry.  

Problem 

Causes 

Solutions 

No dialing tone when 

pressing <TALK ON> 

a.The connection cord of 

   the base station is not 

   plugged in.

b.The adapter cord is not 

   plugged in correctly in 

   the base station.

c. Another handset is using 

    the base to make a call. 

d. Wrong telephone  line cord

  

a.Check the connections. Unplug 

   and plug back in the mains.

   Check that the telephone cord 

   has been plugged into the base 

   station and the phone socket.

b.Check the base station plug and 

   the 230V plug (remove and plug-in).

c.Wait until the line is unoccupied.

d.Use the original telephone  line 

   cord supplied

 

   

 

When connect to a PBX, 

no and/or wrong connection 

after dialing.

Dialing prefix is needed.

Insert the dialing prefix

"SEARCHING" 

is displayed. a.  Base station out of 

     range.

b.  Base station not 

connected to mains.

Reduce the range. 

Connect base station to 

mains.

The call does not work. 

Service not activated or 

wrong operator or wrong 

setting  

Check your Subscription with 

network or change the dial mode.  

No display.

Empty battery

Recharge battery

 key  

Technical Support

If the fault persists...

Disconnect all other instruments 

connected to the  same line as the 

 18

Disconnect the base unit 

from the telephone line and plug a different phone into  

the master telephone socket.  

Try making a call.  If  this works, the  line is OK. 

If the cal l does not work, and you are  using a 

 two-way

 

socket adapter, 

remove 

it and plug a telephone directly into the socket.  If the call now works, the adapter 

may be faulty. 

Please contact the technical support of the network provider for further information. 

This telephone is not equipped with a grounding function

used in PBX systems. 

 system and try to make a call.

Style

9

 

 

all Call list entries

alarm is sounding, to stop the alarm and turn off the snooze function.

ze period

c

 

30

 LONG, 

with the current setting indicated by and asterisk to the 

right).

IMPORTANT: When you purchase an Style18 0 system, all handsets are already 

Handset registration is only necessary when you buy extra handsets or if a  

handset has become faulty.

be deleted but your phonebook remains 

 

, and therefore some of

the functions may be limited when 

11 GUARANTEE AND SERVICE 

The Style 1810 system is guaranteed for 12 months from the date of  

purchase shown on your sales receipt. This guarantee does not cover any 

faults or defects caused by accidents,misuse, fair wear and tear, neglect,  

faults  on the telephone line, lightning, tampering with the equipment, or any 

attempt at adjustment or repair other than through approved agents.

Please keep your sales (till) receipt  this is your guarantee.

You should also keep the original packaging material.

In the unlikely event that you need to return your Style 18 0 system to our 

Repair Centre while it is under guarantee, there may be a h  andling charge.

11.1          While the unit is under Guarantee

1.  Disconnect the base unit from the telephone line and the mains electricity 

     supply.

2.  Pack up all parts of your Style 1810  system , using the original packaging. 

3.  Return the unit to the shop where you bought it, making sure you take your 

sales receipt.

11.2        After the Guarantee has expired

Remember to include the mains adapter.

3.  Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the  

repair charge and details of where to send your Style 18 0 system for repair. 

4.  Make sure you include with your Style 1810 system.

5 Return your 

 system to the address given by the Service 

If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair

 under Guarantee. Then...

¾

Your name and address

¾

A cheque or postal order for the value of the repair

* This does not affect your statutory rights.

Department.

Mar.

Style 1810

¾

A brief description of the fault

 

We the manufacturer / Importer 

 : 

Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF.

 

Declare under our sole responsibility that the following product

Type of equipment:

Digital cordless telephone

Model Name: 

 

Country of Origin:

China

Brand:

complies with the essential protection requirements of R&TTE Directive 1999/5/EC on 
the approximation of the laws of the Member States relating to

 

Radio Spectrum Matters

the  Council Directive 

/

/EC on the approximation of the laws of the Member 

Statesrelating to

 

electromagnetic compatibility (EMC) 

and the European Community 

Directive 2006/95/EC relating to

 

Electrical Safety.

Assessment of compliance of the product with the requirements relating to the 
essential requirements according to Article 3 R&TTE was based on Annex III of the 
Directive 1999/5/EC and the following standard:

Radio Spectrum:

EN 301406: V1.5.1:2003;

 

EMC:

EN 301489-1:V1.5.1:2005;

 

EN 301489-6:V1.2.1;2002;

Electrical Safety:

EN 60950-1:2006. 

Manufacturer / Importer
(signature of authorized person)

 

 200

 

 

Date                

             Signature

Binatone

The conformity to the   requirements is validated by the  

symbol.

NOTE: 

In compliance with Directive 2002/96/EC, when 

 you purchase a  product

that comes 

 

with the symbol 

 shown on the right, you are required to dispose of 

electrical and electronic equipment by separate waste collection and you  

 cannot dispose of the product as  normal waste. 

This equipment

 

 and all its components,

 subsystems and consumable materials 

formed an 

 integral part of this product and when you decide to dispose  

 takethem to a local recycling centre for 

appropriate waste disposal, in compliance with the current regulations. 

  

Details about  the location of  these centres can  be obtained from

 your local authority. 

of them you have to

18

Series

Notes for battery disposal 

Your product contains batteries covered by the European Directive 2006/66/EC, 

 

which cannot be disposed of with normal household waste. 

Please be aware of the local rules on separate collection of batteries. The  

 

correct disposal of batteries helps protect the environment and 

Style

 

10 

9

Mar

1

1

1

10

10

 

 

ANSWERING MACHINE

Your phone includes a telephone answering machine that records unanswered 
calls when it is on.

The answering machine can store up to 59 messages within

   

 incoming messages,you can record 

memos for other users of your phone.   

If the answering machine 

memory is full, the Handset will display  

TAM FULL alternately with the handsets 

name or time, depending on the 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

TAM ON/OFF.

3.  Press <OK> and <UP/DOWN> to select

ON 

or

 OFF.

4.  Press <OK> to confirm.

¾

If answering machine is set to ON, <TAM ON icon> displays on the handset  
LCD. 

¾

If answering machine is set to OFF, <TAM ON icon> will not display on the 
handset LCD. 

 

.2 

Listen to the Messages in the Answering Machine 

When new messages are recorded on the answering machine, the <TAM icon>
flashes on the handset display until all the new messages are played. 

After a new message is played it will be saved as an old message automatically 
unless it is deleted.  
Old messages will be played after all new messages are played completely.   

 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

MSG PLAYBACK.

3.  Press <OK> to start message playback and the screen displays the date and 

time information of the message received. 

Note:

 A <STAR icon> is placed at the centre of the bottom of the handset 

display to indicate that it is a new message. 

 When a message has been played, the <STAR icon> will disappear and will not 

be shown when you listen to this message again. 

2

You can turn the answering machine on or off using the handset.   

 

When the answering machine is set to ON, calls will be answered after the 
set answer delay and the caller can then leave you a message. 
When the answering  machine is set to OFF, calls will be answered after 10 rings 
and the answer only message will be played to your callers.  They will not be  
able to leave you a message. 

handset standby display mode set 

(see section 7.3.7), and you will have to 

the maximum recording time of approximately 15 minutes. As well as recording

8.1 

Turn On/Off the Answering Machine 

8

Note:

 If there are no messages, the handset display will briefly show 

then return to MSG PLAYBACK.

4.  During message playback, press <UP> or <DOWN> to increase or decrease 

the message playback volume respectively. 

5.  Press <MENU> and <UP/DOWN> to select 

STOP, FORWARD, PREVIOUS, 

DELETE

 to perform the following functions during message playback. 

STOP

: Stop the current message playback and return to the 

ANS. MACHINE

 menu. 

FORWARD

: Skip to play the next message.  The date and time information 

of the next message will display if there is another message. 

PREVIOUS

: Repeat playing the current message from the beginning.

The date and time information of the current message will display.

"00-00  00-00" 

DELETE

: Delete the current message and the next message will be played. 

Note:

 Alternatively, you can use the following shortcut keys to control different 

Press <Key 5> to stop message playback. 
Press <Key 4> once to skip to repeat playing the current message from the

Press <Key 6> to skip to play next message. 
Press <Key 2> to delete the current message playback. 

beginning.Press twice to skip backward to play the previous message. 

 operations during message playback. 

1.   Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

DELETE ALL.

3.  Press <OK> to display CONFIRM? 
4.  Press <OK> to delete all old messages. 

Note:

  If there are no more messages in the answering machine, "

EMPTY 

"will 

display and return back to 

ANS. MACHINE

 menu.

You can record your memo message for another user.  When you record a memo, 
the message counter will increase by one and the message can be played back 
in the same way as answering machine messages.  Memo recording can still  

 

function even when the answering machine is turned off. 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

2.  Press <OK> and <UP/DOWN> to select 

MEMO

3.  Press <OK> to start memo recording and “

RECORDING 

” is displayed. 

4.  Press <OK> to stop memo recording and save the memo. 
OR 
4.  Press <C> to stop memo recording without saving and return back to

 ANS. MACHINE 

menu. 

You can use the 

TAM

 

SETTINGS

 menu through the handset to change the  

settings of your answering machine. 

By default, the answer machine is set in 

ANS & REC

 mode which allows callers 

to leave a message.  This mode can be changed to 

ANSWER ONLY

 which does  

not allow callers to leave a message.  In that case, your callers will be prompted   

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.  Press <OK> and <UP/DOWN> to select 

ANSWER MODE

4.  Press <OK> and <UP/DOWN> to select 

ANS & REC

 or 

ANSWER ONLY

5.  Press <OK> to confirm. 

The answering machine announces the outgoing message when it answers a call. 
There is a pre-set OGM for each of 

 mode or 

ANSWER ONLY

 mode,  

which can only be in English

 on this model.

to call back later. 

You can record your own OGM for 

ANS & REC

 mode or 

ANSWER ONLY 

mode.  

When you record your own OGM, it will be used when the answering machine 
answers the call.  If your personalised OGM is deleted, the pre-set OGM will be 

 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.  Press <OK> and <UP/DOWN> to select 

OGM SETTINGS

4.  Press <OK> and <UP/DOWN> to select 

ANS

 

& REC

 or 

ANSWER ONLY

5.  Press <OK> and <UP/DOWN> to select 

RECORD MESS

restored automatically. 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.  Press <OK> and <UP/DOWN> to select 

TAM LANGUAGE

4.  Press <OK> and <UP/DOWN> to select your desired OGM language. 
5.  Press <OK> to confirm. 

6.  Press <OK> to start recording your personalised OGM and 

“RECORDING”

7.  Press <OK> to stop and save your personalised OGM.  Your newly saved 

OGM will playback automatically. 
Alternatively, press <BACK> to return to previous screen without saving the 

 is displayed on the screen. 

personalised OGM. 

6

27

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.  Press <OK> and <UP/DOWN> to select 

RECORD TIME (Available options: 

60S, 120S, 180S, or UNLIMITED)

4.  Press <OK> and <UP/DOWN> to select your desired recording time. 
5.  Press <OK> to confirm. 

Three different compression rates (

HIGH

MEDIUM

 and 

LOW

) are provided for 

rate, the higher the recording quality level attained, but the  

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS.

3.  Press <OK> and <UP/DOWN> to select 

COMPRESSION.

4.  Press <OK> and <UP/DOWN> to select your desired compression rate. 
5.  Press <OK> to confirm. 

Your phone lets you check your messages, or otherwise operate your answering 
machine,by calling the answering machine when you are away from home

remote access PIN code is used to prevent other people from

 unauthorised 

When the answering machine is on and takes a call, you can listen to the caller

leaving a message. You can then identify the caller and decide whether to take 

If the answering machine is set to ON, when there is an incoming message, 

the handset will display “

SCREENING?

  

1.  Press <OK> to start call screening.  The handset who picks up the call can

You can listen to who is leaving the message and decide whether to pick up

2.  The handset will display “

SCREENING

”.

 

3.  You can adjust the speaker volume by pressing <UP or DOWN>. 

OR 

3.  Press <Back> to return to previous screen and you cannot hear the recording. 

At any time if you want to pick up the call,  you can press <TALK ON> and 

the message recording will be stopped automatically.  If the answering

in the process of recording, the message already stored will be

the call in person. 

you to select different quality levels of recording incoming message.  The lower  
the compression 

machine is 

saved. 

the call or not. 

listen.   

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS.

3.  Press <OK> and <UP/DOWN> to select 

CHANGE PIN.

4.  Press <OK> and enter the Old PIN.  (Default Remote Access PIN is 0000). 

5.  Press <OK> and enter the New PIN. 
6.  Press <OK> and enter the New PIN again. 

Note: 

If the new PIN entered in Step 6 is not the same as the new system PIN 

entered in Step 5,  you must enter the new system PIN at step 5 again.
7.  Press <OK> to reconfirm.

4.  Press <OK> and <UP/DOWN> to select 

ON

 or 

OFF

 to turn the remote access  

5.  Press <OK> to confirm. 

.5.9.3 

Access Your Answering Machine Remotely 

You can ring your phone from another tone-dialing phone to switch the  
answering machine on or off, and/or listen to your messages remotely. 
1.  Place a call from a tone-dialing phone to your phone. 

2.  When the answering machine answers the call and starts playing the OGM, 

Note: 

The * must be entered while the OGM is still playing, and the 4-digit PIN 

3.  Enter the 4-digit Remote Access PIN (default PIN is 0000). 

Note:

 If the 4-digit Remote Access PIN is entered incorrectly three times 

consecutively, the line will be released automatically. 
4.  Press the following keys to carry out your desired function.

 

on or off respectively. 

press <KEY *>. 

should be follow without any delays.

)XQFWLRQV

.H\V :KLOHPHVVDJHLVQRWSOD\LQJ

:KLOHPHVVDJHLVSOD\LQJ

'HOHWHWKHFXUUHQWPHVVDJHSOD\

ing

5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH

IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS

EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH

3OD\WKHPHVVDJH

6WRSWKHFXUUHQWPHVVDJHSOD\EDFN

6NLSWRSOD\WKHQH[WPHVVDJH

7XUQRQWKHDQVZHULQJPDFKLQH

6WRSWKHFXUUHQWPHVVDJHSOD\EDFN

7XUQRIIWKHDQVZHULQJPDFKLQH

Note:

 If your answering machine is switched off, the phone will enter into the 

remote access mode after 10 rings.  
You can then enter the <KEY *> and the 4-digit remote a ccess PIN (Default 

 

Remote Access PIN is 0000) to activate the remote access feature. 

 

 

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS.

3.  Press <OK> and <UP/DOWN> to select 

REMOTE ACC.

3

30

When your answering machine memory is full and the answer mode is in 

ANS &

 change to 

ANS & RECORD

 mode automatically after some messages have 

RECORD

,the answer mode will change to 

ANSWER ONLY 

automatically. It will

been deleted.

Call Screening

29

1

32

33

34

1

9 TROUBLESHOOTING

10

8.3 

Delete All Messages in the Answering Machine 

8.4 Record 

Memo 

8.5 Answering 

Machine 

Settings 

8.5.1 

Set the Answer Mode 

8.5.2 

Set the Outgoing Message (OGM) Language.

8.5.3 

Record Your Own Outgoing Message (OGM) 

8.5.7  

8.5.8 

Change the Compression Rate 

8.5.9 

Activate Remote Access

8.5.9.1 

Change the 4-Digit Remote Access PIN 

8.5.9.2 

Activate or Deactivate the Remote Access 

8

5.4  Edit a Phonebook Entry

In idle: 

1.  Press <PHONEBOOK> to access the phonebook. 

2.  Press <UP/DOWN> to select the desired phonebook entry. 

3.  Press <MENU> and <UP/DOWN> to select 

EDIT.

4.  Press <OK> to display the current name.

5.  Edit the name and press <OK>. 

6.  Edit the number and press <OK>. 

7.  Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5  Delete a Phonebook Entry

In idle: 

1.  Press <PHONEBOOK> to access the phonebook. 

2.  Press <UP/DOWN> to select the desired phonebook entry. 

3.  Press <MENU> and <UP/DOWN> to select 

DELETE. 

4.  Press <OK> to confirm, and the entry will be deleted.

 

5.6  Delete 

1.   Press <PHONEBOOK> to access the phonebook. 

2.  

3.  

Press <MENU> and <UP/DOWN> to select 

DELETE ALL.

4.  

Press <OK> to display <CONFIRM?>. 

Press <OK> to confirm. All entries will be deleted and the display will show 

<EMPTY>. 

5.7  Check the Phonebook Usage 

You can check how many phonebook entries are stored in your handset and 

how many phonebook entries are available for you to store in the phonebook. 
1.  Press <PHONEBOOK> to access the phonebook. 
2.  Press <MENU> and <UP/DOWN> to select 

PB STATUS.

3.  Press <OK> to display how much of the phonebook is being used, 

for example <14/20> means 14 entries are stored out of the  

total   available spaces.

all Phonebook entries

20

Function

Key

While message is pla

y

ing 

 

Delete the 

cu

rre

nt messag

e pl
ay

in

g. 

 

Repeat playing the current message 

Play the message 

Stop the current message playback 

 

Skip to play the next message 

 

 

Stop the current message playback 

Turn off the answeri

ng machine 

 

  

from the beginning.  Press twice to 

skip backward to play the previous 

message.

Turn o

n the a

nsweri

ng ma

chin
e  

While message is not play

ing 

delete some messages before any new ones can be recorded.

ANS & REC

 or French (Francais)

access of your answering machine.

from a tone-dialing phone.  

and then dialling a 4-digit remote access PIN 
The 4-digit

shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10  
minutes, HIGH=15 minutes approx). 

28

prevent health 

hazards

2004 108

Answering Machine 

The unit does not record 

new messages. 

The answering machine is 

turned off. 

Turn on the answering machine. 

The caller cannot leave a 

message. 

a. The answering machine 

is turned off.

b. Message memory is full.  

a. Turn on the answering machine.

b. Erase unnecessary messages.  

I cannot operate the 

answering machine 

remotely.  

a. You are entering the 

 wrong remote access code

b.  You are pressing the dial 

     keys too quickly. 

c.   You are using a pulse 

telephone.

a. If you forget the remote maccess 

code, reset to the default settings.

b. Press each key firmly.

c. Try again using a touch tone phone

 

While recording an outgoing 

message or listening to 

messages, the unit rings 

and  recording  stops.   

A call is being received. 

Answer the incoming call 

and try again to record your 

out going message later.

 

 

OGM during playback and record a new one whenever you want.  
Please note that pre-set OGM cannot be deleted. 

You can playback your own personalised OGM or the pre-set OGM for 

ANS & 

REC 

mode or 

ANSWER ONLY 

mode and choose to delete your personalised

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.  Press <OK> and <UP/DOWN> to select 

OGM SETTINGS

4.  Press <OK> and <UP/DOWN> to select 

ANS

 

& REC

 or 

ANSWER ONLY

5.  Press <OK> and <UP/DOWN> to select 

PLAYBACK

6.  Press <OK> to playback your current OGM and 

is displayed on the screen. 

7.  Press <OK> to stop the OGM playback and return to the previous menu. 

Note:

 If a personalised OGM has not been recorded, the pre-set OGM will be played.

8.5.4.2 

Delete the Personalised OGM 

1.  Repeat Steps 1 to 6 in Section 8.5.4.1
2.  Press <C> while the OGM is playing to delete your personalised OGM and 

return to the previous menu and the pre-set OGM is restored automatically. 

Note: 

If the pre-set OGM is playing, you are not allowed to delete it, so pressing 

<C> will just stop the playback and return to the previous menu.  

You can set the number of rings before the answering machine answers and 
starts playing your OGM.  You can set the answering machine to answer after 
two to eight rings or 

TIME SAVER.

If Time Saver is set the answering machine  

1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE.

2.  Press <OK> and <UP/DOWN> to select 

TAM SETTINGS

3.    Press <OK> and <UP/DOWN> to select 

ANSWER DELAY (Available options:

2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER)

4.  Press <OK> and <UP/DOWN> to select your desired answer delay. 
5.  Press <OK> to confirm. 

will answer after 4 rings if there are no new messages, or after 2 rings if there is

 a new message, so if you call in and you don't get an answer 

after 2 or 3 rings, you can hang up and save on call charges.

"PLAYING OGM" 

You can set the maximum length of the recording time of the incoming messages.  
1.  Press <MENU> and <UP/DOWN> to select 

ANS. MACHINE

8.5.4 

Playback and Delete the Outgoing Message (OGM) 

8.5.4.1 

Playback the OGM 

8.5.5 

Set the Answer Delay 

8.5.6 

Set the Recording Time of Incoming Message 

c. ANSWER ONLY mode is set.  

. Change to ANS

 & REC mode.

 

c

Reviews: