33
Batteries
Before you first use the handset, you should have left it on
the charger pod for
up to 15 hours
to charge the batteries
fully. Repeat this.
You may need to
replace the batteries
. Contact the
Binatone Help Line
for advice.
Clean the battery charging contacts
with a dry cloth.
Check the connections
between the base unit and the
mains power socket.
You need to
replace the batteries
. Please note these
safety warnings:
n
Use only
NiMH (Nickel Metal Hydride) rechargeable
batteries, as supplied with the handset.
n
Dispose of used batteries safely
- never burn them, or
put them where they could get punctured.
Using your Big Button Combo on a PBX
When you first make a call, try pressing the
button for
a
pause
between the outside line access digit (e.g. 9) and
the telephone number. You should later be able to redial the
number.
When storing numbers in memory, you can include the
outside line access digit
(e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press the
button
for a pause between the access digit and the number.
You may need to change the
recall
setting. On the cordless
handset, press and hold the
button, select ‘S’ for 100
ms or ‘L’ for 250 ms.
If in doubt, call the Help Line for advice. It will help if
you have your PBX documentation to hand when you
make the call.
“The handset‘s
batteries are
running low
within an
hour or two.”
“The CHARGE
light on the
charger pod does
not come on.“
“I try to recharge
the batteries, but
I still get a
warning that they
are low.”
“Last Number
Redial and/or
memory dialling
don’t work.”
“My phone
won’t work
properly on a PBX”
Troubleshooting
Binatone Help Line:
0845 345 9677
Summary of Contents for SC2050
Page 38: ...37...
Page 39: ...38 Memory Dialling list Name 0 1 2 3 4 5 6 7 8 9...
