Binatone Oval Twin XD1220, Instruction Manual

Page: 16 / 90

16
5. Using the [5] or [6] buttons, select the number you want.
6. Press the OK button [7] to confirm.
7. Using the dialing buttons [11] and the CANCEL button [9] , edit the name.
8. Press the OK button [7] when done with the changes. The LCD [2] will show the
phone number.
9. Using the dialing buttons [11] and the CANCEL button [9] , edit the number.
10.Press the OK button [7] to confirm.
11.Press and hold the CANCEL button [9] to exit this menu item.
Erasing a record from the phone book
1. Press the OK button [7] , the LCD [2] will show: “PHONE BOOK”.
2. Press the OK button [7] , the LCD [2] will show: “ADD”.
3. Press the [6] button repeatedly until the LCD [2] shows: “DELETE”.
4. Press the OK button [7] , the LCD [2] will show the name associated with the first
stored number.
5. Using the [5] or [6] buttons, select the number you want.
6. Press the OK button [7] to view the stored number.
7. Press the OK button [7] , the LCD [2] will show: “CONFIRM?”.
8. Press the OK button [7] to confirm deleting or the CANCEL button [9] to exit this
menu item.
CALLER ID
The Caller ID feature may be available only on some digital telephone stations. Some
telephone companies will charge you for using this service. Consult your telephone
operator to know if this service is available.
If your telephone network supports this feature, you will be able to see the number
and/or name of the calling party before answering the call; this information is stored in
the incoming calls list.
Service messages appearing when receiving the
incoming call
If your telephone network supports the “Caller ID” feature, in some cases instead of
calling party information you may see the following messages:
WITHHELD
The calling party disabled its identification.
UNAVAIL
Network failure. The system was not able to identify the calling party.
The callers list
The phone book can store information of up to 24 answered or missed calls. Each
entry can store a telephone number (up to 23 digits) and the associated name (up to 10
characters).