7
ENGLISH
softer products.
8. Use the blade
(14)
either to remove adhered products from
the cup, or for convenience of cleaning procedure. Store the
blade separately from knives.
Tip application
Dough kneading tip
(9)
1. This tip is used for dough kneading and preparation of differ-
ent mixtures and confectionery masses.
2. Install the cup
(3)
and fix the tip to the actuator
(8)
inside the
cup.
3. Before loading food products, make sure that the tip is prop-
erly installed.
4. Place required ingredients into the cup
(3)
.
5. Close the cup
(3)
with the lid
(2)
and place the pushrod
(1)
in
the food loading opening.
6. Press «I» to switch on the appliance (the dough will be ready
in 1-3 minutes).
Mincer
(10)
1. This tip is used for product milling (meat, vegetables).
2. Install the cup and fix the mincer
(10)
to the actuator
(8)
inside the cup.
3. Before loading food products, make sure that the tip is prop-
erly installed.
4. Place required ingredients into the cup
(3)
.
5. Close the cup
(3)
with the lid
(2)
and place the pushrod
(1)
in
the food loading opening.
6. Press «I» to switch on the appliance.
Use of shredders and knife for slicing French fries
(11, 12, 13)
1. Double-sided tip for coarse shredding and coarse grate
(11)
are applied for slicing products in thick circles, for coarse shred-
ding as well as for grating products in thick trips.
2. Double-sided tip for fine shredding and fine grate
(12)
are
applied for slicing products in thin circles, for fine shredding as
well as for grating products in thin trips.
3. Knife for slicing French fries
(13)
is used for slicing uncooked
potato.
4. Install the cup
(3)
and connect the adaptor
(7)
to the actuator
(8)
.
5. Select of three available replaceable tips
(11-13)
which you
would like to use, and connect it to the adaptor
(7)
by pressing
the side section of the tip.
Note:
put the selected tip
(11-12)
with the
cutting part
upward.
6. Close the cup
(3)
with the lid
(2)
.
7. Load products through a special opening. Use the pushrod
(1)
to push ingredients slowly and steadily.
8. After completion of the work, press «0» to switch the appli-
ance off, and unplug the power cord from the power grid.