background image

Call Ring tone

You can transmit Call Ring tone to other handsets
within range and tuned to the same channel, to alert
them that you want to communicate with them. The
MR700 gives you a choice of ten Call Ring tones.

To choose a Call Ring tone

1

Press the

MENU

button THREE times

appears on the display and the current tone is
played.

2

Press the

or

button to listen to each

Call Ring tone in turn

When you’ve decided which one you want,
and its number is shown on the display …

3

Press the

PTT

button to return to normal

operation

To send Call Ring tone

Briefly press the

START/CALL/+

button

Using the VOX
function

With the VOX function, your handset will automatically
start to transmit when it detects your voice (or other
noise), without the

PTT

button pressed. It will then

transmit for at least 2 seconds, even if you stop talking
before then.

There are three levels of VOX sensitivity. Level 1 is the
most sensitive, meaning that the handset will pick up
softer noises; at Level 3, it will pick up only quite loud
noises.

1

Press the

MENU

button SEVEN times

appears on the display and the current
setting (

1 2 3

or

o

ff

) is shown.

Using the PMR

8

2

Press the

or

button to go to the settng

you want

3

Press the

PTT

button to return to normal

operation

As long as the VOX function is switched on, the
‘Vox’ symbol stays on the display.

The VOX function will be temporarily disabled
while you’re transmitting, receiving, scanning,
monitoring or programming the handset.

Monitoring
the current
channel

The MR700 has an

automatic squelch circuit

, which

turns the speaker off when no-one’s transmitting a
message to you. But if a transmission is weak, this may
prevent your handset picking up the signal.

So you can temporarily de-activate (turn off) the
squelch and monitor all sounds on the channel —

Press and hold the

MON

button

Your handset will pick up any signals on the
current channel, including any background
noise.

To stop monitoring, simply release the

MON

button

(You can’t use monitoring while you’re scanning
channels.)

Using the PMR

Binatone Help Line:

01325 304 473

9

Summary of Contents for MR 700














Reviews: