Binatone Lyris 710, User Manual, Page: 11 / 32

Binatone Help Line - 0845 345 9677
Calls are charged at Local Call rate.
Setting up continue...
8 Press UP or DOWN button to set the third
digit of the REMOTE ACCESS code.
9 Press MENU button to confirm the REMOTE
ACCESS setting.
10 Press EXIT button to return to standby mode.
1 Press Menu button.
Ö The display shows
TAM HD:
ON/OFF setting
OPTIONS MENU OPTIONS MENU
OPTIONS MENU
OPTIONS MENU OPTIONS MENU .
2 Press UP or DOWN button until display shows
3
Press Menu button to confirm.
Ö
The will be blinking.
4
Press UP or DOWN button
to select ON or OFF.
5
Press Menu button to confirm the TAM HD setting.
TAMHD:ON (or OFF).
ON (or OFF)
Two different compression rates (ON and OFF) are
provided for you to select the recording quality /
total recording time of incoming messages.
With the compression rate set to ON the recording
quality will be higher, but it will only save up to 8
minutes of messages.
With the compression rate set to OFF the
recording quality will be lower, but it will only
save up to 20 minutes of messages.
5. Telephone Operation
Ringer volume
The Ringer High-Low switch located at the back of the
Base unit allows you to adjust the
volume of the ringer.
- High volume
- Low volume
Lift the handset or press the SPEAKERPHONE
button on the Base unit.
Ö Check for dial tone.
2 Dial the telephone number.
Ö
The display shows the duration of the call in
minutes and seconds.
To make a
call
1
Using the Pre-dial mode
11