Binatone Help Line - 0845 345 9677
3.8 Setting the Roger Beep
The Roger Beep is a tone which is automatically transmitted
whenever the PTT button is released. This alerts the receiving party
to inform that you have intentionally ended the transmission, and you
are now in receive mode.
a. Press the MENU button 9 times, the “ON” icon is blinking
on the LCD Screen.
b. Press the UP or DOWN button to select the Roger beep
On/Off.
c. Press the PTT button to confirm your setting.
3.9 Setting the Key Tone ON or OFF
This feature allows the Terrain 650 to emit a confirmation tone
a. Press the MENU button 10 times, the “ON” icon is
blinking on the LCD Screen.
b. Press the UP or DOWN button to select the Key tone
On/Off.
c. Press the PTT button to confirm your setting.
4. Setting the Dual Watch Mode
Your Terrain 650 is capable of monitoring two channels, the current
channel, it will stop and receive the signal.
a. Press the MENU button 11 times, “DCM” icon will be
displayed while “
OF
” flashes on the LCD Screen.
b. Press the UP or DOWN button to select the Dual Watch
channel (1-8, except the current channel).
c. Press the MENU button to change the CTCSS code.
d. Press the UP or DOWN button to select the desired
CTCSS code (1-38)
e. Press the MENU button to change the DCS code.
f. Press the PTT button to confirm your setting.
5. Auxiliary Features
5.1 Key Lock
The Key Lock feature allows user to disable the UP,
DOWN and MENU buttons so that the Terrain 650
a. To activate the Key Lock feature, press and hold the
MENU button until key lock
“
”
icon appears on
the LCD Screen.
b. To deactivate the key Lock feature, press and hold the
MENU button until key lock
“
”
icon
disappears
on the LCD Screen.
Note: The PTT, and POWER buttons will remain
functional even if the Key Lock feature is activated.
5.2 LCD Screen Back Light
Every time a button is pressed (except PTT and CALL
button), the LCD Screen back light will illuminate for 4
seconds.
5.3 Microphone/Earphone/Charge Jack
The Terrain 650 is equipped with an auxiliary microphone,
earphone, and charge jack located at the opposite side of
the PTT button.
after pressing each button.
and another (dual watch) channel. If the unit detects a signal on either
settings could not be changed accidentally.
