Binatone HM-365B, Instruction Manual

Page: 5 / 30

5 55 55
ENGLISH
6. Connect the appliance to the power outlet and set the speed
selector (2) (2) (2) (2) (2) to the desired setting to start operation of the
machine. Always start operating the machine at the lowest
speed gradually increasing the speed.
7. At the end of the operation set the speed selector (2) (2) (2) (2) (2) to «0»
position and switch the unit off the power supply.
8. Remove excessive products from attachments by a plastic or
wooden scapula.
9. Push the button of automatic ejection of attachments (3) (3)
(3) (3)
(3) to take
them out of the housing (1) (1) (1) (1) (1) .
Use of the stand with removable bowl
You may use the bowl with or without the stand. In order to use
the mixer with the stand:
1. Fill the bowl
(9) (9)
(9) (9) (9) with all necessary ingredients.
2. Put the bowl (9) (9)
(9) (9)
(9) on the stand (8) (8)
(8) (8)
(8) . Make sure the bowl guides
are aligned with grooves in the stand.
3. Place the mixer onto the stand:
– Align mating grooves to fix the mixer (12) (12) (12) (12) (12) with the mount-
ing hooks on the stand (13) (13) (13) (13) (13) .
– Push the lock button (15) (15) (15) (15) (15) and place the mixer fully down
onto the stand. Release the button
(15) (15)
(15) (15) (15) .
– Make sure the mixer is securely attached to the stand and
all fixtures are reliably fastened.
4. To remove the bowl from the stand in the course of the operation
of the equipment (without taking the mixer off the stand), push
the lock button (15) (15) (15) (15) (15) and while pressing it slightly lift the mixer
as shown in figure B in figure B in figure B in figure B in figure B . Release the button (15) (15) (15) (15) (15) . The mixer is
locked in the upper position. To return the mixer into the initial
position, push the button
(15) (15)
(15) (15) (15) and while pressing it lower the
mixer accurately into place.
5. To detach the mixer off the sand, push the mixer detachment
button (14) (14) (14) (14) (14) as shown in figure C. in figure C. in figure C. in figure C. in figure C.
CLEANING AND CARE
1. Always disconnect the unit from the power
outlet before cleaning.
2. Rub the housing (1) (1)
(1) (1)
(1) and the power cord
(16) (16) (16) (16) (16) of the machine with damp cloth and
then rub it dry.
3. Wash the attachments (5,6) (5,6) (5,6) (5,6) (5,6) in warm wa-
ter with detergent and dry them. Attach-
ments may be washed in a dishwashing machine.
Note: never immerse the appliance’s housing (1) and the
power cord (16) into water.